Ply for the rear 1/4 panels - where from?

[Skyliner33]

I am looking for 2 ply panels in 3.6mm for the rear panels, full height in a LWB van. Basically from the back of the sliding door backwards.
I would go to the Custom place near Blackburn but they are, let's say, a bit rubbish.
Thanks

@AJCConversions @Eclipse Custom Vans can yu supply these? Im in Manchester.

 

[Bigsidavies]

Scroll down to near the bottom of this page.

Camper Conversion Cost & Pricing | AJC Conversions Ltd

We understand that budget and cost are important factors when embarking on a camper conversion. With that in mind, we designed our pricing system and calculator to help you calculate the cost of your dream camper, right down to the last LED and USB socket, from the comfort of your own home.

ajcconversions.co.uk

 

[Skyliner33]

Thanks @Bigsidavies .

@AJCConversions do I have to order them first or can I just pick up, Thanks.

 

[AJCConversions]

We normally ask for a couple of days notice to make them up.
You can call the office on 01457 239071.

 

[Skyliner33]

We normally ask for a couple of days notice to make them up.
You can call the office on 01457 239071.

Yep, I will call in office hours either Mon or Tues.

 

[Bigsidavies]

Thanks @Bigsidavies .

@AJCConversions do I have to order them first or can I just pick up, Thanks.

Ha, didn’t know they were on here. I just know they are local to me. I made my own using the original hardboard as a template.

 

[Skyliner33]

Ha, didn’t know they were on here. I just know they are local to me. I made my own using the original hardboard as a template.

Mine, original ones are only half height. You still got yours?

 

[Bigsidavies]

Mine, original ones are only half height. You still got yours?

No I took them to the tip.

 

[R300JSG]

I am looking for 2 ply panels in 3.6mm for the rear panels, full height in a LWB van. Basically from the back of the sliding door backwards.
I would go to the Custom place near Blackburn but they are, let's say, a bit rubbish.
Thanks

@AJCConversions @Eclipse Custom Vans can yu supply these? Im in Manchester.

Why did you find Custom Shop a bit rubbish? I've just tried to offer up the rear panels i got from there and no pre drilled holes seem to match up and the corner is a different shape?!