The legs are stowed in place when the board is up in bulkhead mode.
They maybe a way of adding a bar to stop the board being dropped down...but you have to lift/pivot up the base board to allow that..... And if you have gear placed there it's next to impossible to move.
So might be best to get the unit first, suss out how it operates, then look at what you want to do after.
They maybe a way of adding a bar to stop the board being dropped down...but you have to lift/pivot up the base board to allow that..... And if you have gear placed there it's next to impossible to move.
So might be best to get the unit first, suss out how it operates, then look at what you want to do after.
Yeh makes total sense. Really I just want to stop anyone IF they got into front of the van, from taking the bulkhead down to get inside load area. Am sure there's a way to do it, and noted on if you're keeping stuff on parcel shelf etc. So it may secure itself.
Ta
have a look here on how it operates. . .
2:20 full bulkhead mode.
.
2:20 full bulkhead mode.
.
Hi guys, has anyone used the bike bar yet to fit two 29er mtb’s? Seen some images around and it looks very tight/unfeasible. Looking at options to carry two 29er mtb’s using the ovano system.
I’ve got a LWB kombi and if the bike bar doesn’t work then I was considering making some form of storage system on the drawer itself by removing the top panel each time, whether that be a rear wheel storage system placed at the back of the drawer or making a fork mounted system to fit at the front of the drawer.
Thoughts encouraged! Cheers.
I’ve got a LWB kombi and if the bike bar doesn’t work then I was considering making some form of storage system on the drawer itself by removing the top panel each time, whether that be a rear wheel storage system placed at the back of the drawer or making a fork mounted system to fit at the front of the drawer.
Thoughts encouraged! Cheers.
kevinwalkerjnr
New Member
Hey
This is exactly what I need , what's the height from combi floor to bed top.
Or height required to clear folded seats
Looking at putting something together myself if I can get the relevant info , without my seats fitted I can't make the configuration out and how much space left behind seats when up
Thanks
Hi Kevin,
I’ve just measured my Ovano and it’s 560mm from the floor to the underside of the bed platform .
Where abouts in Manchester are you? I’m Stalybridge area and was going to offer for you to have a look at mine. I figured it might help if your planning to build your own .
Cheers,
Adam
taylored energy
New Member
Anyone have a Narrow and lives in Edinburgh or near by? for the same reason as above it would be great to see one up close as I'm trying to invent my own.
Why didn't you just ask them to design and configure to suit your needs?
Good question as I can’t see much of a difference either. Aside from the way the bulkhead is held in place.
I'm off down to ovano tomorrow morning to have one fitted gave up waiting around in end. Spoken to a few people and the ovano seems to be of a slightly higher quality using stainless steel fixings etc
The screws etc on our Cadco are all stainless.
I doubt you’ll find anyone who can truly compare as everyone seems to buy one type and sticks with it.
I researched as much as I could at the time and couldn’t see where the additional funds would warrant the Ovano.
I’m sure you’ll be happy with either.
I doubt you’ll find anyone who can truly compare as everyone seems to buy one type and sticks with it.
I researched as much as I could at the time and couldn’t see where the additional funds would warrant the Ovano.
I’m sure you’ll be happy with either.
Resale value for one
The ovano is a great bit of kit you won’t be disappointed
I think that will be relative too…
Not looking to resell as this will be customised to my insta T6_Floyd which will be engraved into the bulkhead board.
Fair enough but bulkhead alone can be replaced if needed in the future.
In all honesty I looked at both trying to justify the money but the ovano is the original and first and in my eyes the better one.
Hi all,
We've seen the question rgearding whats sets us apart a lot, so thought it might be helpful to offer some insight from our side as the original makers of the Switch system that it appears all the others are now based on.
There are a number of similar-looking units out there now, and while some are clearly (influenced
) by our early designs, there are a few important differences that separate them from what we do.
Over the years, we’ve made a series of refinements that improve strength, durability, and usability in ways that aren’t always obvious in photos:
We build everything in-house, and support doesn’t stop at checkout. If something does go wrong (rare, but possible with mechanical stuff), we’ll actually sort it – not deflect or blame the user. Please do checkout other posts or our Google reviews for verification on this, but we take customer service VERY seriously.
It’s probably worth mentioning that we see Ovano as a brand, not just a product. That means we put a lot of focus on long-term trust, consistent customer experience, and developing new ideas carefully rather than rushing things to market. We’ve built a reputation for quality and support, and we’re proud of the number of returning customers and word-of-mouth recommendations.
Also worth noting – we now ship Switch FULLY ASSEMBLED. So if someone can’t get to us or take time off work, they can still get a unit delivered, and fit in under an hour from arrival.
Hope that helps explain some of the differences. Not trying to slate anyone else here, just setting out what we do and why.
If anyone has any questions, or wants to come view a unit, or even if your considering buying a second hand unit from somewhere on the forum and would like some advice, please do get in touch.
We've seen the question rgearding whats sets us apart a lot, so thought it might be helpful to offer some insight from our side as the original makers of the Switch system that it appears all the others are now based on.
There are a number of similar-looking units out there now, and while some are clearly (influenced
) by our early designs, there are a few important differences that separate them from what we do.Over the years, we’ve made a series of refinements that improve strength, durability, and usability in ways that aren’t always obvious in photos:
- We use stabiliser brackets to improve rigidity across the frame.
- Rubber dampers are built in to prevent drawer rattle while driving.
- Our flap hinges are marine-grade stainless steel (most use zinc-plated, which don’t last as well and are prone to snapping).
- The bulkhead is held with Dyneema-cored line – lighter, neater, and significantly stronger than flimsy toggles, especially in an emergency stop.
- We’ve completely removed toggle clamps, which are prone to snagging on kit. The latch system is now simpler and easier to use.
- All cut edges are varnished, not just raw ply. Might sound small, but it helps longevity and gives a far more finished feel.
We build everything in-house, and support doesn’t stop at checkout. If something does go wrong (rare, but possible with mechanical stuff), we’ll actually sort it – not deflect or blame the user. Please do checkout other posts or our Google reviews for verification on this, but we take customer service VERY seriously.
It’s probably worth mentioning that we see Ovano as a brand, not just a product. That means we put a lot of focus on long-term trust, consistent customer experience, and developing new ideas carefully rather than rushing things to market. We’ve built a reputation for quality and support, and we’re proud of the number of returning customers and word-of-mouth recommendations.
Also worth noting – we now ship Switch FULLY ASSEMBLED. So if someone can’t get to us or take time off work, they can still get a unit delivered, and fit in under an hour from arrival.
Hope that helps explain some of the differences. Not trying to slate anyone else here, just setting out what we do and why.
If anyone has any questions, or wants to come view a unit, or even if your considering buying a second hand unit from somewhere on the forum and would like some advice, please do get in touch.
Similar threads
