LED-headlight main beam relay for emer lights

[M4rv3]

Led headlight help

Basicallly I’m after main beam power supply as I want it to flash my orange beacons when I flash my headlights I have a few relays and switches setup so my beacons don’t turn my headlights on and vice Versa unless my control panel has switches in the right position but I basically wanna know what colour wire I can steel a main been feed from?

I have a 69 plate T6 with led headlights factory originals

Thanks in advance for the help

 

[Loz]

There are wiring diagrams in the download area but here is a snag of the nearside, I assume you want to be on the battery side?

 

[Loz]

See this topic.

Adding Spotlights To T6 With Factory Fit LEDs

Just a note for anyone else trying to work out which wire you need to splice into, to get spotlights working on a T6 that has factory fit LEDs, it's the thin white/black one and not the thicker white/black one on pin 8. There is another post here that said pin 6 was the low beam and pin 8 was...

www.t6forum.com

 

[M4rv3]

I just want a 12v supply to come live when the headlight flashes but I’m guessing there’s some funky stuff going on with control modules?

 

[Loz]

Read the post I linked.

 

[M4rv3]

Read the post I linked.

I have just after I posted and that is perfect I’ll post a video once I’ve sorted it