Laser 4 Wheel Alignment

[Stu1974]

Hi All
VW T6 4 Motion.
Van Spec- H&R Coilovers, 20” alloys, 265/40/20 tyres running 39-40psi, poly bushes all around and H&R roll bars. Approx 50mm lowered over standard.

I’m having what seems like usual drifting to the left whilst driving problem that a few guys have mentioned on here.
If I let go of the steering wheel it drifts to the curb, hard shoulder or whatever road I’m on with a camber.
I’ve had the van 4 Wheel Laser aligned, Before and after screen shot below.
They have adjusted it and say It is straight as an arrow. Yet it still pulls.
Maybe it’s just the camber of the road, because if I drive in the left it pulls to the left, drive on wrong side of road it pulls to the right. Drive in the middle is nearly drives straight.
None of my other cars do this type of pulling and I’m just wondering if it’s normal..
Do you guys see anything that would cause this on this setup/readings from pictire?
Any help guys?

 

[PB-T6]

Hi
i notice the printout you show has no reading for castor.
effectivly they have not performed the quick 10 degree left and right swing.
Castor is a vital straight line stability influencer.
when we have a full readout -further comment can be made.
a basic check is to have swapped around the front tyres side to side.
as offset belts in a radial tyre construction can cause cone shape in tyre and side pull.