Hello, I don't know iff you get a answer on your question.
But you can change the time by changing module 09 chanal 038. standard value is: 21 (10.5 minutes) en you can change it to 254 (127 minutes). it's multiplying whit 30 sec.
Excellent info. Thanks. Seems to match with my observations in thread Led Rear Interior Lights - How I Done It.
- channel 38 in my van has value of 121 - and indeed I had observed the lights (obviously the new setting came with factory LEDs in cargo space) stay on for 60 mins.
The BCM could still be used to trigger the relay . . . . . , its odd because ELSAWIN shows a direct connection to the BCM for power feeds and neg for the lamps . . . . . but the front BCM carrier shows a location for a "interior light" relay. . . . . i need to get and check mine to see if i have the relay. . . . . we know the BCM is the timer . . . . . but not 100% if or who has a additional relay.
It’s present on mine, it’s a half size relay and fits on a double carrier sharing the other half with the headlight washer relay, that’s the only reason I know as I did the washer retrofit full factory style
It’s present on mine, it’s a half size relay and fits on a double carrier sharing the other half with the headlight washer relay, that’s the only reason I know as I did the washer retrofit full factory style
so on yours the BCM must switch the relay on for the +v timer and use the BCM -v for the fade-out. (so i assume when you take the relay out you loose all the internal lights?)
Hello, I don't know iff you get a answer on your question.
But you can change the time by changing module 09 chanal 038. standard value is: 21 (10.5 minutes) en you can change it to 254 (127 minutes). it's multiplying whit 30 sec.
Thanks again. I had a play with a couple of values and can double confirm the adaptation as described above. And of course the value "0" gives no lights.
Code:
Address 09: Cent. Elect. (J519) Labels:. 7E0-937-BCM-V1.clb
Part No SW: 7E0 937 090 C HW: 7E0 937 090 C
Component: BCM PQ25 Max4 H82 0752
Revision: B9082001
A kind of interesting thing is that VCDS HEX-V2 does not need the ignition to be on when playing with module 09 adaptations or codings. Then e.g. OBDeleven requires the ignition to be switched on.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.