How Low??.............. SoLow!

[CarpyT6]

In my experience with this kit I've not seen a front drop as small as that, usually closer to 100mm. As with any coil over kit though, the actual drop varies depending on the weight of the van to which it's being fitted.

There isn't an advertised minimum drop that I've come across, but in any case, the advice remains the same, it's not a kit for those looking for moderate drops, it's for those looking for extreme lows.

Fair enough

 

[F2JON]

Has anyone adjusted the fronts on these on the van? I’ve tried the weekend but the threaded collar was just spinning, any idea how you hold it to stop it spinning ?

 

[S700]

You need to use one of the c spanners in the notch on the threaded sleeve and one on the lower collar to unlock them.

Then same again with one in the sleeve and the other to move the upper collar to raise/lower.

 

[Wilmur]

There's a notch for the larger c spanner to hold the threaded body at the bottom

 

[F2JON]

Ok cheers I’ll have another go but I tried both spanner’s in the notches but it didn’t hold it.

 

[S700]

I had to file one of mine down a bit to fit the notch (B14s)

 

[F2JON]

I had to file one of mine down a bit to fit the notch (B14s)

Ah ok I’ll give that a try I’ve got two sets of spanner’s anyway