Finally fixed the fader but have more..

[GavMc P11GT]

Finally finished the radio I believe the thread on here had the solution and it was @Absolut5 as usual who had the solution with the coding. So thanks for that!

Clock 00:00 is infinity may have found a fix for that I just need more time for research.

Lastly on my old radio I could run the radio off my leisure battery so the starter didn’t go flat there was a switched feed from the leisure battery to the HU and it worked a treat but having a standard VW van is jobbie doesn’t seem to be any good.

Is there a terminal on the back of the composition media that I could run the feed to? I want the HU to work without the keys.

 

[RunDSG]

Finally finished the radio I believe the thread on here had the solution and it was @Absolut5 as usual who had the solution with the coding. So thanks for that!

Clock 00:00 is infinity may have found a fix for that I just need more time for research.

Lastly on my old radio I could run the radio off my leisure battery so the starter didn’t go flat there was a switched feed from the leisure battery to the HU and it worked a treat but having a standard VW van is jobbie doesn’t seem to be any good.

Is there a terminal on the back of the composition media that I could run the feed to? I want the HU to work without the keys.

View attachment 332310

Hey Gav,

I have a mate struggling with coding his fader on T6.1. Can I ask what your issue was and how your fixed it? Or refer me to the other thread?

Cheers

 

[GavMc P11GT]

Post in thread '[Guide] Enable rear speaker fader in a T6'

29 Aug 2016

Assuming you havent done this before the first step is to run a full scan and save the results, this will give you a record of all the modules installed, any faults that are present and the current coding configuration, theres a button to copy the results, just paste it in to notepad and save the file, if it all goes tits up this will give you a fall back for your default settings

To change stereo enter - Controller 5F-Information Electr
Click coding then when box appears click on long code helper, when that displays click on box 5 which will be byte 4
Underneath you will now see the...

• Pauly

• 

 

[GavMc P11GT]

Incredibly yesterday we had fader today we don’t and there’s been no coding in between

 

[doncarlyon]

Incredibly yesterday we had fader today we don’t and there’s been no coding in between

Speakers still connected?

 

[GavMc P11GT]

Yeah

 

[doncarlyon]

Maybe it's lost the plot.

The bloke who added my reverse camera was meant to do the rear fader but couldn't, said it didn't show up.

I think I'll try again using OBDeleven

 

[Absolut5]

Hey Gav,

I have a mate struggling with coding his fader on T6.1. Can I ask what your issue was and how your fixed it? Or refer me to the other thread?

Cheers

What head unit is it , age of t6.1 and does it have an amp attached ?

 

[RunDSG]

What head unit is it , age of t6.1 and does it have an amp attached ?

70 plate T6.1 with the basic head unit. As far as I can tell, no factory amp (and he certainly hasn’t added one himself). Cheers.

 

[doncarlyon]

Just added it to mine with OBDeleven