Dsg gearbox compatibility

IrishT6

Member
Hi all would anyone know if try and sdj gearboxes are compatible?
I can reuse the mechatronic from my box (sdj) if need be
 
Hey Irish, when I put a 2017 T6 California 4mo dsg drivetrain into my T5.1 dsg (fwd) ... quite a few said it'll never work .... lol
What I actually checked was the additional information via VCDS, component level info.
All I found when jumping from a 2wd DSG up to 4motion DSG was like library component codes, .rod coding, and found I was all good just 4mo DSG box had later revisions etc ... see my scan on my box here .....


Address 02: Auto Trans (J743) Labels:. 0BH-927-711.clb
Part No SW: 0BT 300 012 C HW: 0BH 927 711 G
Component: DSG DQ500-7A H11 5302
Revision: 00H11V01 CVN: E785A3F3
Coding: 0014
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_TCMDQ500021 001001
ROD: EV_TCMDQ500021_001_VW36.rod
VCID: 2F6B5CAA767FADEE62-807A

No fault code found.
I had the shite driveshaft issue, 4motion drivetrain seems with it's design alot better quality.

I checked the stuff above not the actual gearbox code, although it was there, seemed not an issue, if it's out a T6 go for it, but be aware of any DMF changes prior to refit .. lol
 
Back
Top