Hi guys I've bought a Chinese Bluetooth mfsw control, as a stop gap until I can get my mfsw fitted to a kenwood dmx5020s stereo.
My question is the Bluetooth unit comes on a android loom, I know if I cut the Bluetooth part off and wire it in it should work.
The cables are labeled, illuminate, ground,key 1, key 2,and acc.
On the kenwood I have the following.
Could any body enlighten me, or correct me in thinking. That key 1 is steering wheel remote input
Key 2 is input 1 or 2
Gnd is gnd
Acc is yellow ignition live. On iso
Illuminate is orange wire.on iso
Any help would be appreciated
Thank you..
My question is the Bluetooth unit comes on a android loom, I know if I cut the Bluetooth part off and wire it in it should work.
The cables are labeled, illuminate, ground,key 1, key 2,and acc.
On the kenwood I have the following.
Could any body enlighten me, or correct me in thinking. That key 1 is steering wheel remote input
Key 2 is input 1 or 2
Gnd is gnd
Acc is yellow ignition live. On iso
Illuminate is orange wire.on iso
Any help would be appreciated
Thank you..
Last edited:
