Aftermarket camera to OEM Discover Media question

[davvaer]

Hello!
I searched and searched for answer but none really was correct for me.

Im Installing a aftermarket camera to OEM Discover media. As far as i read, all i really need is for the installation is power and ground to the camera as long as i code the headunit. The need for a reverse signal is not needed, as it runs on canbus correct?

I connected everything as in the picture but its not working. The headunit is coded correct with VCDS. (When i put the car in reverse the correct screen shows up, but its black and after a few seconds it tells me park pilot is not avalible)

What am i missing here??
(The car also has park sensors if that matters)

Thanks!!

 

[davvaer]

This is the adapter i use.

 

[Dav-Tec]

Have you got parking sensors? Did you code them?

 

[davvaer]

Have you got parking sensors? Did you code them?

Yes i have OEM parking sensors in the rear. Do i need to code any special then? I only did code the standard camera activation Module 10 and 5.

 

[Dav-Tec]

No if you have turned on the coding in modules 10 and 5F it should work. What year van is it

 

[davvaer]

No if you have turned on the coding in modules 10 and 5F it should work. What year van is it

2016. But my wire diagram looks correct?

 

[Dav-Tec]

Does it actually switch over but just give you a black screen?

 

[Fishinbrine]

Have you taken the 12v switched from a reverse light feed or from a true switched 12v that uses the reverse light feed as a trigger for the relay?

 

[Dav-Tec]

Where did you take power and ground from

 

[davvaer]

Have you taken the 12v switched from a reverse light feed or from a true switched 12v that uses the reverse light feed as a trigger for the relay?

I have taken the 12+ from a switched 12v from the fusebox

 

[davvaer]

Where did you take power and ground from

12v from a ignition live from the fusebox, the ground is chassi

 

[davvaer]

The camera also has a red wire coming from the rca connector but i guess that is just a passtrough +12v if u want to take power from the front? See image

 

[davvaer]

Does it actually switch over but just give you a black screen?

Yes, i get the overview look, with the car to the left for the pdc and the background is all black, after a few seconds i get kicked back to main screen and its say park pilot is not avalible.