7n0907572 7n0907561

[Igor22]

Hello everyone, it's cold outside, so I have a B6 for now (maybe it will grow to a T6 someday), so I installed the 7n0907572 front radar and almost got it running, the only thing it lacks is (mHandschalter_1) (https://drive.google.com/file/d/1PbeRtdYXuAdhuqRqV_MmKj79G0TYvBjj/view?usp=drive_link)here is the link to my file and damos

 

[Bav]

Igor, please post in English.

 

[Igor22]

Igor, please post in English.

sori

 

[Igor22]

Hello everyone, it's cold outside, so I have a B6 for now (maybe it will grow to a T6 someday), so I installed the 7n0907572 front radar and almost got it running, the only thing it lacks is

 

[Igor22]

small changes I have already made Ce ff ff 00 01 01 to Ce ff ff 00 01 00
F7 3b 10 to f7 2b 10
D3 00 FF BD 83 03 to D3 00 F7 B9 83 03


but still it didn't work. but if you select electric drive in the radar settings then the error disappears and you can see the car on the screen but the acc still doesn't turn on

 

[Bav]

sori

Thank you

 

[Igor22]

This is what it looks like now.

 

[Igor22]

Good morning everyone. Great news, I changed the settings for the transmission channel to ((f7 fb f0)) and the error disappeared))))) but the cruise buttons do not work, I understand that I need to adjust the reception channel, does anyone have any thoughts?

 

[spacewalker]

your ECU is what sorry ?

 

[Igor22]

Due to recent changes in the engine control unit firmware, the mHandschalter error has disappeared. But ACC does not turn on. I think it is because of the regular steering column switch. Does anyone know what the difference is between a regular steering column switch and a steering column switch with ACC? I think there are other resistors because my regular lever responds to turning on and off and increasing speed and to the set key.

 

[spacewalker]

Due to recent changes in the engine control unit firmware, the mHandschalter error has disappeared. But ACC does not turn on. I think it is because of the regular steering column switch. Does anyone know what the difference is between a regular steering column switch and a steering column switch with ACC? I think there are other resistors because my regular lever responds to turning on and off and increasing speed and to the set key.

nobody know what is your ECU
if you install something what is NOT factory, you must know if your controler support it or not
so far, Passat B6 , no matter what ECU is there, use typical CCS signal Low / high trigger.
some ECU can be change to understand MFSW CCS signal, but factory is from CCS "stalk "

 

[Igor22]

i have cbab edc 17cp20 03l906019ac

 

[spacewalker]

i have cbab edc 17cp20 03l906019ac

this ECU never use CCS over MFSW
so what you expecting from factory configuration ?

 

[Igor22]

Do you know what exactly needs to be changed? Engine block firmware or something else. I changed the firmware a little and there are no errors in the radar.