2011 2.0 t5.1 timing issue

[paulpaulpault5]

Hi all

New to the forum, have a t5.1 2.0 2011 timing belt done 4k ago using ina parts , all fine up until recently at 2k 70ish mph uphill the coil light flashes and logs a passive dtc , p0016 , looks like it reached -6 rechecked timing today and all aligns , took belt off reset cam pulley and checked again all aligns , fault is still presented , checked advance measurements on vcds it shows -4.35 ranging to -4.50 when revving , sensors I assume are fine as not hard to start cold or hot not running rough power seems fine etc , I'm pointing towards the crank pulley to be the issue , anyone able to shed any light ? Thanks all

Paul

 

[mmi]

Any progress?

 

[paulpaulpault5]

Any progress?

Nothing

 

[mmi]

looks like it reached -6

on vcds it shows -4.35 ranging to -4.50 when revving

I guess you are referring to


Obviously the ECU is seeing and reporting cam and crank sensor signals being out of sync.

Any chance to provide VCDS Auto-Scan and full engine blockmap files please?

1) Full VCDS Auto-Scan
2) Engine blockmap - Ignition ON/engine OFF
3) Engine blockmap - Engine running at idle

How-to create a blockmap file:

[VCDS]
[Applications]
[Controller Channel Map]
- Single Controller Address = 01
- Login or security access code: Leave blank
- Function: Measuring values
- Output: CSV file
[Go]

The result CSV files are saved into directory C:\Ross-Tech\VCDS\Logs
Please attach the files here.