200W Perlight Mono Panel - 12v

[RikParr73]

Sadly my Photonic Universe 120w flexible panel has failed after only 4 years :-( I have a Victron MPPT 75/15 and would like to replace the faulty panel with a 200w Perlight Panel, purely because of the high VOC (50.97%) which is meant to be good (Is this true?) Can anyone vouch for this product and if not recommend a 200w panel and/or point out anything to take into account before replacing the panel please? Thanks, Rik.

 

[yossarian]

high VOC (50.97%) which is meant to be good

Not really a consideration. A High Voc (measured in volts) will allow a slightly more efficient energy transfer through the same wires or allow for thinner wires. Your primary consideration is power. Your MPPT can only accept one of these modules in series.