top mounts

OK so here's the short of it - T6.1 DSG 22 plate. 17k miles. Koni Shocks and Evoteck Springs added c/o CRS when van had less than 100 miles on the clock. Lowered 50mm. Running 19 inch Brocks on 245/45/19 Uniroyals. Been very happy with the ride etc. Developed a bit of a clunk/snap/crackle and...

Does anyone know if you re-use the orginal rubber upper when fitting eibach adjustable son the rear? Thanks

Does anyone know the diameter of the machined part of the top mount when modifying? I’ve bought some off eBay and they don’t seem the right size to me, but as I don’t have anything to compare to I can’t be sure. Thanks Lee

Hi all, currently in France for another week with our t5.1 (2014 t28 102) and I have a squeal/squeak from the front drivers side. At first thought it was a stone caught between the disc and backplate but not convinced. I notice it when manoeuvring at slow speeds with the window open but also...

Anyone had creeking noises coming from the front when at low speed or maneuvering ? for example parking and turning the wheel and horrible creeking noises. Had a look today and got the front wheels off the floor, turning the wheel you can hear and see the top mount rubber ( from the under...

Morning, I am about to replace the top mounts, struts, all bushes (wishbones and and ARB's), discs and pads on the front end of my t5.1 4motion. Any specific order that anyone would recomend? Anyone have a list close to hand of torque settings? Mark

Has anyone on here got this kit from travelinlite- transporters Is this everything needed for a suspension upgrade/lowering Looking for advice on this pack as I will have to get a local fitter/garage to install...

Recently fitted front B14 coilovers and the top mount is fully tight but the strut still seems loose, is this correct ? They have been on for about 6 weeks and have had a knocking noise from the top mount. Any thoughts ? Taking them back out and going to use the lock nut supplied with the...

Quick one.... About to drop my T32 T6.1 on Twin Monotube Projekt Sensitiv coilovers. It's covered only 4 thousand miles....would you bother putting new top mounts in? Cheers all

Having a bit of a garage clear out, so these are available. Collection from Manchester. Springs are from a T6 T30 FOC but beer gratefully accepted. Other items will be coming up soon. (Mainly ply and spare steel wheels).

As most already know. We don’t like excessively dropped Vans because of the residual problems it causes , but I do get asked by some customers about the modified top mount , and the merits of this mod. Promoted by a few accessory companies . I thought it would be a good idea to expose this...

Please help. I am now at my wit's end! Within the last few months, I have lowered our T30, on 40mm Cobra springs. At the time, I changed the top mounts for Meyle ones, the drops links and also the rear rubber cups. Since, then, I have had issues with the top mount bearings going and have...