dimensions

  1. Bav

    Van height?

    A number of times now I've been out & about in the van and found myself approaching a height-restriction barrier at the entrance to a carpark. Very unsure if the van would fit under, each time I've panicked and demanded Mrs Bav jump out and call yea or nay as to whether I'd fit under. Obviously...
  2. J

    Interior dimensions

    Hi guys. My first post...Looking at building my own units and just wanted to check the smaller length dim 2324mm is to the back of the seat fully reclined and the longer 2572mm is going under the seat? Jamie
  3. Gareth Edmondson

    Skyline Standard Dimensions

    Evening all, DOes anyone have a dimensions drawnig similar to the one attached for a Skyline Standard pop top? Or have you taken your measurements? I've taken some today but wanted to check as one or two seem a bit out by a few cm. I'll call back in the conversion company tomorrow again to...
  4. E

    Mirror Height when folded

    Could someone with a standard ride height t6.1 or t6 van be so kind as to measure the height of their folded mirrors in the folded position (at the bottom edge and top edge). I’ve roughly scaled off the VW technical drawing and reckon the lower edge is somewhere around 120cm and upper edge 155cm...
  5. S

    HiLo Surf roof dimensions wanted

    I am now in a position where I need to replace a broken HiLo Surf Roof but, being located in the far North East of Scotland, there’s no-one nearby that can advise me on the options, so rather than drive 600 miles or more for someone to have a look at the van, I’m wondering if anyone can help...
  6. Cubist

    Help with Dimensions

    Hi Guys, I am new to the forum and hoping for some help. I've got my new van on order and was hoping to sort out my conversion design while I wait for it to arrive. I am looking for some help with some wheel arch measurements (see attached pic). The van is a SWB. Thanks in advance! Will
  7. H

    Van Dimensions

    Hi all After many hours research and going around in circles(!) I am very close to buying a VW California Beach. It would be an easier sell to my other half if I can store the van in our garage (we are short on driveway space). I know I'm okay on the length of the van but could anyone tell me...
  8. T6 Side 2

    T6 Side 2

    from https://bb-database.de/jctumbau/en/web/international/transporter-technische-zeichnungen
  9. T6 Rear

    T6 Rear

    from https://bb-database.de/jctumbau/en/web/international/transporter-technische-zeichnungen
  10. Ann3x

    Making My Own Furniture - 3d Renders

    Gradually been converting my Kombi (and failing massively to update my build thread - one for a rainy day in Autumn :)). Finally getting to the end and I've reach the furniture stage. My build / requirements are non-standard and I cant see anything flat pack / off the shelf that fits my needs...
  11. X

    Size Of Interior

    Can someone measure the distance between the backs of the rear seats in a Kombi to the front of the passenger area - top of steering wheel and to front of front bulkhead (by brake pedal) - LWB or SWB is fine - it should be the same. Weird question I know but it relates to tax treatments...
  12. jswilko

    Width Of T6 With Mirrors Folded In?

    Hi, I'm about to buy my first T6, it has electric folding wing mirrors, does anyone know or could measure the width of the van with the wing mirrors folded in. It's not a deal breaker but would just like to know if I will be able to get the van up my drive past my gate posts. Thanks in advance. John
  13. andythom188

    Rear Load Sliding Tray for Cali / Velle rails

    Just fitted the rear load sliding tray into the caravelle rails. Very impressed how it fits with the multiflex board. Very sturdy bit of kit, well currently got it extended while im sitting on it swinging me legs and cider beside me. Hopfully no more scratched rear bumper and clambering in the...
  14. GordyT6

    ICE Upgrade????

    Looking at swapping front speakers. Without stripping door first does anyone know what sizes I need to be looking at? Also any recommendations? Ta peeps
  15. S

    T6 CAD data?

    Hello, has anyone got any files that are useful? i would love to get my hands on a lwb - version... would help loads with my bed design as measuring in 3-d is slightly tricky...! looking for step/iges etc.. will pay for them but only if they're good and not just a rendered exterior! all help...
Back
Top