Search results for query: Sliding door fuse

I’m not far from you and also have to use the Chelmsford van centre for the All-in. They’re no worse than other dealers IMHO. For a well respected indy locally I have used and others have on here also - VW Mad - Steve is great. https://www.facebook.com/p/VW-Mad-UK-100062953222779/?locale=en_GB

Evening All, Today, I finally got round to installing the PF Jones Tow Bar kit for my T6 (without Trailor prep). All went well until I got to the coding part, and I'm now left with a van where I have loads of issues likely due to me messing up somewhere. Issues: Central Locking, Lights...

Pretty much as @Pauly says, if you slide out the fuse carriers under the seat, you can see the separate Red feed wires from the fuse carriers, follow them back the the loom and remove loom tape until you find the joint. if you have access to sewing kit, you can use an unstitching tool to hook...

If you are a T6 then this is the current flow diagram for the doors: https://www.t6forum.com/threads/electric-sliding-door-wiring-diagram.28947/ As @n10n noted earlier V293 is the door motor and J558 is to door control module - ideally finding a place to measure the voltage getting to those as...

Similar problem here. I have an automatic sliding door problem on my 2017 VW Multivan. From the fob and center console only the soft close motor activated, but not the sliding action. No sound coming from the door motor either. Checked fuses under bonnet, under seats, in the center column under...

A slight repost of the thread I started in the engine topic, but hoping for a new audience with electrical know-how. I hit an aggressive speed hump at about 20mph and all doors unlocked, abs/traction control warning light came on and tpm light came on. Van ran about another 200 metres then just...

Yes, pretty much, drivers side will be easier. Solar looking after hab does not automatically feed into starter.

Hi All. I'm hoping that you guys can help shed some light on my issue. I have a 3 way portable fridge (Dometic RC2100) which I use on the 3 pin house socket for chilling and loading, then on the 12v cigarette lighter socket for the journey, then obvs back on to elec or gas when camping. The...

Hello, I'm trying to disable the power latching soft close on my sliding side doors on my T6. I find them too loud in the middle of the night. And yes, before anyone says it, I think it will be quieter slamming the door manually! Any way to disable this feature? Pull a fuse? VCDS? Cheers.

Hello, I have installed 3 spotlights in the van on the sliding door side, it's run through a fuse box and into a CBE dimmer switch. Now here's the issue..... I put the fuse in and the lights come on but very dim (dimmer switch is off) turn the dimmer on and the lights come on as expected and...

I've got this problem with the sliding switch. The spring seems ok but the copper isn't making a connection. Fuse was replaced because I blew that inserting the led bulbs. Contact bent in the way and blew the fuse. Two small bulbs work but can't get the switch to work. The spring and copper...

I found it and its not pretty! I appear to have some water ingress into the van and it looks like its been going on for some time judging by the state of the wiring connection on B311. I think it was just a coincidence that the fault came when it did and after replacing the fuses I feel pretty...

Ahi Hi there, me again, I’m finally getting around to this, got all the bits needed and I’ve cleared next weekend to do this along with adding some additional lighting. Can I ask; with the unit in the cubby, did you just drill a hole though to where the cab light sits and pull cables...

you have discovered the limitations of a system that was designed to deliver 6A for 10-20 seconds, and then the world decided to plug gadgets into it that draw maximum current indefinitely. You can get a 16A Hella DIN socket that will fit, but the problem just moves, as the vehicle wiring isn't...

Similar issues with mine, press the close button on the dash twice see if that works. I believe I have damage to my door seal which has a pinch sensor inside. I have sprayed some wd40 into mine and massaged around the entire seal. This seems to give it a few more weeks use before I need to...

Some updated photos. Still a work in progress but delighted to nearly be at the finish line of having a functioning camper. I was very skeptical about the amount I spent on Dodo Mat products but the difference is really noticeable when driving. Will need to wait and see if it makes a difference...

Hello electrical geniuses I'm converting a T6.1 panel van so at the moment have the two OEM LED ceiling lights with no override switch at the lights. I've read the threads I can find regarding this and see that it can be set up whereby the cargo area lights can be wired via a three way toggle...

I have my Sanjo Fridge freezer in my camper, was working fine. Parked it up at storage for about a month then wouldn't turn on. Mcb had tripped and will not turn back on. Checked fuses from battery, all fuses around Sterling Power charger all good too. Before I unscrew the Fridge are there any...

nope, this isn't a camper, only non standard electricals are 4x small LED spots in the headlining, which I can only presume are wired into the main cabin light as they only come on when the doors are opened/ van unlocked in the same way the main cabin interior light comes on. There is a single...

The first thing to check would be 40A fuse in holder SH27 under left seat. (For the right door it would be fuse in SH25.) These fuses should be in location 7 in the picture.