What to do?

[spikesykes]

I bought a Bilstein b14 comfort kit a few weeks ago for my t30 4 motion, not sure I've done the right thing.
I've only fitted the rears as of yet and this is what I have, so not fitting the fronts. I adjusted the springs to give me more height as it is a campervan and a 4 motion, so a bit heavier. I would like more height and there is some adjustment left but at this point the springs are already rubbing together.
I'm really not happy with this. So really you can't actually adjust from 40)70mm without the spring rubbing together.
This is very poor imo, so really the spring set up is not fit for purpose.
Reason for going for this kit was that all my shockers were shot.
I'm going to contact the supplier and manufacturer tomorrow and it's a good job I didn't pay someone else to fit the kit.
I should have read all the good advice on here first

 

[JOG]

Oh dear - that’s terrible. Hopefully you can return them.

Speak with @CRS Performance and he will provide a better solution. He also provides telephone support for your fitter or competent DIYer.

 

[Dellmassive]

@CRS Performance - do you have any advice?

Hes in Doncaster so 86.3miles to get to you. . . .

 

[JOG]

@CRS Performance - do you have any advice?

Hes in Doncaster so 86.3miles to get to you. . . .

I and many others have travelled further for Steve and Jim to work their magic!!!

 

[CRS Performance]

All too often we see this problem .

Transporter 4 motion Camper is the heaviest van there is and these kits can not carry the weight with in their designed lowering range !

We have seen these kits at full height adjustment sitting 90 mm lower than standard . That tells you the springs cant cope .

Ill reply to your P M and we can help sort this out today !

 

[spikesykes]

The new rear springs & shocks off now and van sat on stands until I get a replacement.
Complaints lodged with Heritage parts & Bilstein, these kits are certainly not fit for purpose on a 4 motion campervan.

 

[spikesykes]

The Bilstein kit is now on its way back to the retailer for a refund and new suspension setup purchased from @CRS Performance and a big thank you to Steve for his help on resolving this problem for me.

 

[Sackmycook]

Well done @CRS Performance

 

[The Flying Scotsman]

I and many others have travelled further for Steve and Jim to work their magic!!!

I traveled from Scotland to CRS in Cannock to get my suspension done and it’s one of the best things I’ve done to the van