Undertray fixings

[RK04DUB]

Afternoon all. Looked underneath today and clearly has the original exhaust on which is look g a little worse for wear…

But…I need to remove the under trays and as with the exhaust, all the bolts are looking massively corroded having NEVER been touched by the looks. The rust is just flaking off the fixings before I’ve even got the socket set out the shed…

…anyone know part numbers or alternative fixings for these as I’d like to get some ordered up before I even start so at least I know I can replace them as I go…

Thanks again for your help

 

[drinfinity]

Try these, or alternatives on your favourite online store.

Volkswagen Transporter T5 Trim Clips and Fasteners

Next day delivery available on a range of plastic trim clips, fasteners and rivets for the Volkswagen Transporter. Small or large pack sizes.

www.vehicleclips.co.uk

 

[RK04DUB]

Try these, or alternatives on your favourite online store.

Volkswagen Transporter T5 Trim Clips and Fasteners

Next day delivery available on a range of plastic trim clips, fasteners and rivets for the Volkswagen Transporter. Small or large pack sizes.

www.vehicleclips.co.uk

Thanks @drinfinity although they only seem to offer the washers, I’m gonna need the bolts too as I’ll be lucky if they come off at all…they’re in a pretty bad way after 18 years…

 

[CarreraRSR]

Engine Under Tray Bolt T5 2003–2015, T6 2015 on

Engine under tray bolt. Fits VW T5 Transporters from 2003 to 2015 and all T6s. Sold individually, 6 required per tray

www.justkampers.com

 

[RK04DUB]

Engine Under Tray Bolt T5 2003–2015, T6 2015 on

Engine under tray bolt. Fits VW T5 Transporters from 2003 to 2015 and all T6s. Sold individually, 6 required per tray

www.justkampers.com

That definitely looks more like it! Thanks @CarreraRSR

 

[drinfinity]

Those ones will do the front tray under the engine. The ones one the side trays are more like self tapping roofing screws.

 

[RK04DUB]

Those ones will do the front tray under the engine. The ones one the side trays are more like self tapping roofing screws.

why can’t they just use the same throughout…???