T6 - Front Upgrade - In for a penny ??
- Thread starter nodecentral
- Start date
-
- Tags
- front sensors headlights
Just wanted to say thanks again @Pauly , I’m continuing to read through the various related threads/posts on this subject and the following came up?
www.carsystems.eu
I assume this is not a necessity, more a nice to have ? Is that true ?
Also, am I right in saying that the new 8K module that’ll come with the front PDC kit from car systems eu, will be pre-configured so will be seen and work, straight out the box once it’s all installed? (No VCDS etc. required for the retrofitting front sensors?)
VW T6 - Adapter + Module 1K8919472A - Upgrade
www.carsystems.eu
I assume this is not a necessity, more a nice to have ? Is that true ?
Also, am I right in saying that the new 8K module that’ll come with the front PDC kit from car systems eu, will be pre-configured so will be seen and work, straight out the box once it’s all installed? (No VCDS etc. required for the retrofitting front sensors?)
Sorry to highjack this thread, I am looking at fitting front PDC, the controller I have is 7E0919475T - Parklife 4k is this compatible with 7E0919475S / 7E0919475AA quoted for front and rear PDC? I.E do I need to change (J446)
Also is it possible to retrofit the front ACC? sensor as this 2017 TDI150 DSG Highline doesn't have it fitted
Thanks
Trello
Also is it possible to retrofit the front ACC? sensor as this 2017 TDI150 DSG Highline doesn't have it fitted
Thanks
Trello
Hi @Trello , it sounds like you’re attempting a similar project to me, (although I need to finish my cab upgrade first, before I start anything else, especially taking the front off 
)
Would love to hear how your retrofit goes, and the exact parts you buy.
Are you doing the fog lights too, or do you have them in already ?
) Would love to hear how your retrofit goes, and the exact parts you buy.
Are you doing the fog lights too, or do you have them in already ?
@Pauly
When it comes to upgrading to the 8K Module , it’s looks like the part number needed starts with “7E0919475” , but from there, there looks to be a lot of different one some end with “T”, or “L”, or “K” or “AA”. ?
The last one seems to be the most common used in T6s. But what do the suffix letters mean and can you use any of them ?
When it comes to upgrading to the 8K Module , it’s looks like the part number needed starts with “7E0919475” , but from there, there looks to be a lot of different one some end with “T”, or “L”, or “K” or “AA”. ?
The last one seems to be the most common used in T6s. But what do the suffix letters mean and can you use any of them ?
Im not sure is the honest answer, i would assume its just different software etc
It looks like S and AA are the 8k versions
K & T = 4K
L & AA & S = 8K
looking on ETKA it shows T & AA variants under transporters
carsystems list S & AA part numbers on their upgrade kits so i would stick with them (preferably AA if available ?)
It looks like S and AA are the 8k versions
K & T = 4K
L & AA & S = 8K
looking on ETKA it shows T & AA variants under transporters
carsystems list S & AA part numbers on their upgrade kits so i would stick with them (preferably AA if available ?)
Yeah, it seems like AA is the one to focus on, i recall someone on here sell a S a while back, so thats a good sign..
Looking online there are a number of 8Ks (VW don’t make it easy)
Looking online there are a number of 8Ks (VW don’t make it easy)
Manufacture date on all of those apart from the AA predate the release of T6 vans and a couple say 7N0 which i think is sharan ?
Its more than possible they will work just fine but not really worth taking the chance (unless they are dirt cheap) i would stick with S or preferably AA
Its more than possible they will work just fine but not really worth taking the chance (unless they are dirt cheap) i would stick with S or preferably AA
Similar threads
