T6.1 BCM T6PA Std+ Bulb Error Disable

[JiFi91]

Hello, apparently on the BCM of my brother's T6.1, coding is not available. Is there any way (adaption?) to get rid of bulb errors for LED bulbs in reversing lights, license plate lights and possilby turn signal lights?

Any tips much appreciated.

 

[manfrotto]

Why does he think coding is not available? The programming is done in Central Electrics module 09

 

[JiFi91]

We tried it in VCDS - when I clicked on 09 and wanted to go to Coding, a message saying that coding is not available appeared. I have a unit which supports Security Access and coding on other vehicles works fine.

I also forgot to ask one more thing - is it possible to get the pinout for the T6.1 H15 connector? We tried LED H15 bulbs, but they did not even turn on. I was told polarity might be an issue, though it never occurred to me seeing as there is only one pssible way to plug the connector in. The H15 LED bulb worked fine when tested on my lab PSU.

 

[DanW81]

T6.1 bcm changes are made in 'adaptions' list. No longer is long coding g used i believe

 

[JiFi91]

Is there any adaptations reference guide from which I could infer which channels/parameters I should look for and which values I should change them to? Half of the stuff there is in German, which does not exactly help me understand what I am actually looking at.

 

[DanW81]

Is there any adaptations reference guide from which I could infer which channels/parameters I should look for and which values I should change them to? Half of the stuff there is in German, which does not exactly help me understand what I am actually looking at.

Ok, I maybe able to supply you my leuchte channels and adaptions changes I made when I installed the factory led rear tail lights.

If you however have fitted aftermarket led bulbs/ tailights I am not sure this would be any use. You may have to painstakingly go through all the LED lamp load settings descriptions one by one to see what keeps the bcm happy.
I think these are the correct channels

Rear indicator lamps
Leuchte 18BLK left
Leuchte 19 BLK right

Leuchte 25KZL licence plate lights

Leuchte 28 RFL reverse lights

 

[JiFi91]

Thank you very much, will try that once I get to the car and report back with the results.