Found Seat fixings (Genuine)

[ma77y]

I'm after 4 x nuts and 4 x spline bolts for fixing seats to bases.

Thanks

 

[Gavinda]

Seats fix to bases with hex head bolts in to captive nuts. Any suitability sized, high tensile (12.9) fixings will work.

 

[Skyliner33]

Seats fix to bases with hex head bolts in to captive nuts. Any suitability sized, high tensile (12.9) fixings will work.

No, they use bolts at the rear and nuts at the front.

 

[ma77y]

Non oem is last resort really, thought I'd ask on here as I know what you guys are like for collecting bits. I thought they were spline bolts at the rear similar to seatbelt bolts.

 

[Gavinda]

As @Skyliner33 says the fronts are flanged nuts onto studs, both nuts and bolts are M8 course if that helps.

 

[ma77y]

Yeah cheers Gavinda, would still prefer oem nuts and bolts with it being such an important fixing.

Seat base I bought didn't come with them so I'd like a set plus spare set.

 

[Skyliner33]

Just go and get them from the local dealers.

 

[Vwdm]

That is an OEM bolt. There are 4 of them, one in each corner (ish). Securing the seat squab to the seat frame.

I had 1 missing. Replaced with a standard hex head high tensile M8 bolt
Something like this

M8 x 20mm FLANGED BOLTS HIGH TENSILE SET SCREWS HEX BOLTS STEEL ZINC DIN 6921 | eBay

Standard DIN 6921. Screw Length 20mm.

www.ebay.co.uk