Reverse camera

[T16mbo]

Just purchased my dads t6
Swiss vans installed a pioneer avic-z910dab back in 2018. It had a reverse camera fitted and in its time replaced 2 times. It’s not worked for a while . I took a look earlier at the camera end and all looked ok.
When you select reverse it’s a black screen .
Does anyone know where I can get one of these cameras please . Can’t seem to find anything

 

[ArtD]

I had the same problem with pioneer as well but sortied it out with additoinal relay:
ATD CCA-18510 Reverse Camera Relay Power

all works well now. you need to have access to extra power for the reverse camera and put a relay in between. happy to show on photo as I'm still working on roof

 

[Adever121]

Did this get resolved had camera on my van for about 12 months no issues now I'm getting black screen no signal assuming wiring fine because when disconnecting reverse trigger cable radio doesn't recognise in reverse

 

[JumpShip]

Is the rear cam switched on in settings ?

 

[Adever121]

Yes it's really odd worked for months then stopped and now I've replaced everything and it's not working it's just doing what it did when It stopped working no signal tried new and old headunit

 

[T16mbo]

Did this get resolved had camera on my van for about 12 months no issues now I'm getting black screen no signal assuming wiring fine because when disconnecting reverse trigger cable radio doesn't recognise in reverse

Yes I sourced a new camera from the manufacturer and fitted .