P01E600 Engine Coolant Temp 3

[Seanyst]

Hi guys keep getting code relating to coolant temp 3 I’ve changed the 2 others one in engine and the one on radiator underneath. Struggling to find where 3 is ?

 

[Phil_j89]

Under the inlet manifold?

Which sensors have you replaced.

 

[Seanyst]

Changed the one at the bottom of the engine and one on the right side looking in bag from the front both with the c clips style looking at sensor 3 has a bolt on it to un do just no info anywhere about it

 

[Phil_j89]

Underneath the inlet manifold.

 

[Seanyst]

Underneath the inlet manifold.

Big job to get to can I do it myself mate ?

 

[Phil_j89]

Big job to get to can I do it myself mate ?

You'd be well to get to it without pulling the front end forward into the 'service position'.

 

[mmi]

Struggling to find where 3 is ?

Would be more than helpful to know exactly which engine you have got and which year.
Also the code P01E600 could be triggered from wiring issue.

 

[Seanyst]

66 plate 204hp

 

[Seanyst]

 

[mmi]

On MY16 CXEB engine the coolant temperature sender 3 (G812) should be located near EGR cooler.
Please check the wiring as the code P01E6 (short to plus) suggests wiring issue.


Details in downloads:

4-cylinder common rail engine CXEB CXFA CXGA CXGB CXHA CXGC CXHB

5 Feb 2023

CXEB CXFA CXGA CXGB CXHA CXGC CXHB

• Loz
• cxeb engine cxfa engine cxga engine cxgb engine cxgc engine cxha engine cxhb engine manual
• VW Manuals

VIP membership needed to download

VIP Membership

VIP Membership Information

www.t6forum.com