Ovano & Electrics

[jjkilpatrick]

Hi all,

Just wondering if anyone has an experience, photos or tips you could share around installing electrics around an ovano switch. The subsystem is all under the drivers seat and as I'd like to leave the passenger for a sub/amp I think it would be best my multiplus subsystem near the rear wheel arch. That system would comprise of Multiplus, 2 x consumer units, 2x ac loads, 12v distribution board.

Cheers

 

[Josh (OVANO)]

Hey,

As a general starting point I'd suggest mounting things either below or above 550-650mm from the floor as otherwise the bed platform and supports could start getting in the way when plugging things in etc. Theres plenty of room around the arches still. You have full access to the jack etc on the passenger side, so you'd have the same access if you wanted to do something on the drivers side. All space above and in front of the arch is usable, but for things you'll need regular access to I'd position in the mirrored jack storage point and light switches up above.

 

[jjkilpatrick]

@Josh (OVANO) thanks so much for the detailed reply. Thats made a huge difference.