Non start

[Steve lewis]

Hi all

First post, I’ve got a 2023 t6 it’s a non start with no cans to eobd socket. Power feeds and grounds to socket all good won’t connect to any body modules or ecus. Any pointers of where to start would be great

 

[StratosFearXX]

There was someone else recently with no Comms to obd, will try and find the thread.

 

[StratosFearXX]

Thread 'My van wont scan!' My van wont scan!

 

[Steve lewis]

There was someone else recently with no Comms to obd, will try and find the thread.

Yes cheers for that. I’ve got the original eobd plug got feeds but no can signals coming to it. I’ve got a breaker box and it’s showing feeds but no cans. Found the gateway module behind the instrument cluster so a wiring diagram would be helpful if one is available

 

[StratosFearXX]

Yes cheers for that. I’ve got the original eobd plug got feeds but no can signals coming to it. I’ve got a breaker box and it’s showing feeds but no cans. Found the gateway module behind the instrument cluster so a wiring diagram would be helpful if one is available

View attachment 329212

No idea, good luck

 

[Dellmassive]

Loads of schematics in the download section.

All available when your a VIP member... Only £12.99

VIP Membership

VIP Membership Information

www.t6forum.com

.

 

[Dellmassive]

What's happened to the van recently before it stopped working?

I've seen this before with a reversed jump start blowing a main fuse under the battery tray.

So what happened before?