Anyone fitted this?
Would like to know what's involved and where it plugs into?
Would like to know what's involved and where it plugs into?
Interior Tailgate opener
- Thread starter StratosFearXX
- Start date
Not fitted that, but a Momentary Switch will do the same job, for peanuts. Its a DIY job tapping into the rear release wiring.
There is a thread somewhere.....
There is a thread somewhere.....
Thanks yeah, think I'll probably just get this one rather than DIYing it ...
Good luck
Bought it and fitted it, plugs had a different locating tang on them which annoyed me a bit (that they didn't supply it with the correct plugs) so had to trim them off. Works fine. Nice to have.
Can I just ask, do you have an electric tailgate or just an electric latch?
And Where does the button sit when installed?
And Where does the button sit when installed?
Need to be careful with uncovered push switches when driving, as if any load moves in the van and pushes the switch it will open the tailgate.
Electric both on mine (didn't actually want that as you just know it'll go wrong someday).
Button can go anywhere on the tailgate panel, I have mine top right if I'm inside looking at it.
Excellent. Thank you. And aside from the tabs is it just plug and play?
Yeah, appreciate that's a concern. I'd like to think once the van is moving it's clever enough to realise I don't want the tailgate to open ... will have to test that next time I'm on a field.
Yes totally plug and play. Very easy to DIY as well, just two wires and a switch if you connect to the wires going to the tailgate handle.
The OEM release switches are pull to open, part of me thinks thats the reason why.
