Headunit installation help

t6robbie

Member
Hi, so I've ordered a Kenwood DMX8021DABS headunit along with a ln ACV transporter specific fitting kit from Halfords. Is there anything else I need for it to function properly and keep reverse sensors, steering wheel controls etc before I pull it apart! Thanks in advance!
 
Evening
As long as you have the specific wiring harness then it’s plug and play.
I would advise placing the GPS Ariel on the passenger side dash as close to the bottom of the screen as possible.
 
Hi, so I've ordered a Kenwood DMX8021DABS headunit along with a ln ACV transporter specific fitting kit from Halfords. Is there anything else I need for it to function properly and keep reverse sensors, steering wheel controls etc before I pull it apart! Thanks in advance!
Can you pop a picture of all the parts you purchased, I will tell you if it’s all correct
 
Can you pop a picture of all the parts you purchased, I will tell you if it’s all correct
Thank you! This looks to be all that's included with the kit. Can I keep the original hands free mic or do I need to install one of those as well?
Cheers, Rob

Screenshot_20260114_061520_Samsung Internet.webp
 
Back
Top