Engine Management light.

[Whittle1000]

Hi All,

Hope all is well.

I hoping for a little advice, today I filled up with diesel and when starting the van I had a message pop up on the screen,

Oil service 5700 / 13 days and Inspection 9000ml/12 days, the engine management light is also illuminated, is this all coincidence

When driving the EML stays on, is this normal or do I have something to worry about?.

Many thanks Andy

 

[Sasquatch]

Check your oil and water. If theyre good and its driving OK you're probably OK to carry on for a short while.

You really need the codes read before you can make an informed decision.

 

[Whittle1000]

Check your oil and water. If theyre good and its driving OK you're probably OK to carry on for a short while.

You really need the codes read before you can make an informed decision.

Many Thanks, I'll check the oil level, water seems okay. I'll let the engine cool down little before checking. The oil was changed in January with the van only covering around 3000 miles this year.

 

[Sasquatch]

You want to most definitely be checking the oil weekly in a 6/6.1, as when they're not burning it theyre sometimes diluting it instead, but its probably ok.

 

[mmi]

light is also illuminated, is this all coincidence

Just a coincidence.

The light is "only" for excessive exhaust emissions. If things get really serious - you'll get a different warning light.

 

[Whittle1000]

Just a coincidence.

The light is "only" for excessive exhaust emissions. If things get really serious - you'll get a different warning light.


View attachment 312071


View attachment 312072

Many thanks for this, that's a worry. Would it be a DPF issue? The van seams to be driving fine?. Not sure if I can force a region or even if that works. Thanks.

 

[Salty Spuds]

Many thanks for this, that's a worry. Would it be a DPF issue? The van seams to be driving fine?. Not sure if I can force a region or even if that works. Thanks.

Get it on the motorway, 2500rpm, 60mph and spank it for 1/2 hour.

 

[Whittle1000]

Hi All, Hope your all well.

Well finally managed to sort Carista out for the van,
I’ve ran the codes and have the following error P2015 intake manifold runner position sensor/switch circuit range, Perfomance Blank 1

Have you guys any experience with this?

Thanks Andy.

 

[Howzat]

Clear the code and run the van to see if it comes back.