Bulb out warning light/fast-flash after disconnecting tow bar wiring

[jgm0]

Hey, I recently got myself an ex-aa t6 and it is fitted with an aux batter under passenger seat. It seems to have some wiring for “jump starting” via a socket at the bumper, split charge relay and tow bar.

I disconnected the tow bar and jump starting wires from the battery and now I am getting light out warning on dash and fast blinking indicators. Checked all bulbs and they are fine. Is this because of the tow? Do I need to code it out?

Cheers in advance

 

[Rich20]

Try coding it out and if that doesn’t work then maybe disconnect the canbus towbar wires as they might still be looking for the lights.