Broken Rear Tail Light Connector

scoffgoal

Member
VIP Member
I’m currently in the process of replacing my rear tail lights, the offside light came off no problem, but the drivers side would not budge. After being a “bit” more forceful I managed to break the clip :(

Anyone got any advice how I can remove this without using a big hammer?

IMG_4340.webp
 
Thanks for all the advice guys, in the end I spent around another hour going through every tool in my toolbox, I have no idea how I did it in the end, but I got the thing off. Next time I'll definitely remember the correct technique and not break the clip as I don't want to have to go through that again 😂
 
There is a specific VW electrical connector removal tool you can buy (aliexpress etc) but not sure if it does the connector you are referring to.
 
It's not something I've had difficulty with and that coming from someone with next to no technical ability
 
Was you trying to depin the connection so you could swap the wires around or get the connection off? If the connection is damaged you should be able to see a part number on it so it can be replaced. It will just need to depinned and swapped over.
 
Was you trying to depin the connection so you could swap the wires around or get the connection off? If the connection is damaged you should be able to see a part number on it so it can be replaced. It will just need to depinned and swapped over.
I was trying to release the connected to fit new tail lights
 
Back
Top