C Cahn New Member 30 Mar 2026 #1 Hi I am very new here - as you can tell from this question "how can I open this, I think it is the electric hook up flap?" Thank you CAHN
Hi I am very new here - as you can tell from this question "how can I open this, I think it is the electric hook up flap?" Thank you CAHN
M Macp Senior Member VIP Member T6 Guru 30 Mar 2026 #2 Dont you just pull it, and its on a spring so flicks shut.
L Lubrown Senior Member T6 Legend 30 Mar 2026 #3 Mine just pulls up from the bottom edge. It clicks shut (not the strongest click ever) to stop it flapping in the wind.
Mine just pulls up from the bottom edge. It clicks shut (not the strongest click ever) to stop it flapping in the wind.
C Cahn New Member 30 Mar 2026 #4 Thank you both - I did try that but it didn't seem to move so wondered if there was some kind of release... maybe I will try a bit harder ...
Thank you both - I did try that but it didn't seem to move so wondered if there was some kind of release... maybe I will try a bit harder ...
Salty Spuds Senior Member VCDS User VIP Member T6 Legend 30 Mar 2026 #5 Cahn said: Thank you both - I did try that but it didn't seem to move so wondered if there was some kind of release... maybe I will try a bit harder ... Click to expand... They need a good tug…
Cahn said: Thank you both - I did try that but it didn't seem to move so wondered if there was some kind of release... maybe I will try a bit harder ... Click to expand... They need a good tug…
L Lubrown Senior Member T6 Legend 30 Mar 2026 #6 Cahn said: Thank you both - I did try that but it didn't seem to move so wondered if there was some kind of release... maybe I will try a bit harder ... Click to expand... Could always try sliding an old credit card around the gap - sides and bottom edge, just to release it a little without too much pressure
Cahn said: Thank you both - I did try that but it didn't seem to move so wondered if there was some kind of release... maybe I will try a bit harder ... Click to expand... Could always try sliding an old credit card around the gap - sides and bottom edge, just to release it a little without too much pressure
C Cahn New Member 30 Mar 2026 #7 Great thanks both will try these out.. was afraid of pulling too hard and the whole thing coming off!
Great thanks both will try these out.. was afraid of pulling too hard and the whole thing coming off!
Sackmycook Leisuredrive Vivante VIP Member T6 Legend 30 Mar 2026 #8 As above, lift up from bottom. They are designed to be stiff
S SlightlyDisturbed Senior Member VIP Member T6 Guru 30 Mar 2026 #9 Salty Spuds said: They need a good tug… Click to expand... The perfect response for your username