I've had Solow lows fitted to my van for over 2 years on there lowest setting with hub mod and machined top mounts. In that time everything has been faultless, zero issues and no driveshaft judder that most experience!
That was up until about 3 months ago. I first noticed a bit of vibration on a long trip but didn't pay much attention to it. It has now developed into a quite bad judder that only happens at 65mph and over. Under that it's perfectly fine. There's no banging or clunking, no noises of any sort just a judder at 65mph.
Below is what I've tried to cure the issue:
Swapped out my wheels for my spare set
Had the wheels rebalanced
Changed front tyres for new ones
Changed drivers side driveshaft
Changed drivers side wheel bearing
Raised front suspension by 30mm
I've got another bearing for the passenger side along with a new driveshaft that im going to fit. I know it wont cure it, but process of elimination and all that!
Am I missing something obvious? Please help it's doing my head in, and with a 2.5k mile trip across France and Switzerland in less than 2 weeks i need it sorted!
Please help!
That was up until about 3 months ago. I first noticed a bit of vibration on a long trip but didn't pay much attention to it. It has now developed into a quite bad judder that only happens at 65mph and over. Under that it's perfectly fine. There's no banging or clunking, no noises of any sort just a judder at 65mph.
Below is what I've tried to cure the issue:
Swapped out my wheels for my spare set
Had the wheels rebalanced
Changed front tyres for new ones
Changed drivers side driveshaft
Changed drivers side wheel bearing
Raised front suspension by 30mm
I've got another bearing for the passenger side along with a new driveshaft that im going to fit. I know it wont cure it, but process of elimination and all that!
Am I missing something obvious? Please help it's doing my head in, and with a 2.5k mile trip across France and Switzerland in less than 2 weeks i need it sorted!
Please help!
