ABS GLOSS BLACK B-POST DOOR PILLAR GUARD COVERS

IMG_3423.webpIMG_3422.webpimage0.webp

Quite easy to fit but needed a little bit of careful trimming to fit into the gap around the glass behind the pillar. Could just be the way the windows are fitted in my van, I think some of the adhesive got in the way. At the time I used a sharp Stanley knife, a Dremel type tool would probably be better. Wasn’t a big problem just took a little longer.
 
I had to bin mine as when fitted the front doors and sliding doors caught on each other. Vinyl wrapped now.
 
Hi David did you ever fit these? Looking at the same myself. Thanks
No I wasn't convinced due to the comments of cutting as above. Will probably go down a vinyl route when I get round to it.
 
Has anyone fitted these from Vansyle?


I'm trying to decide between these ABS covers vs a vinyl wrap? was wondering if anyone had could offer some first hand experience?

Total shite. Vinyl is much better. Couldn’t believe I was expected to cut into the £60 plastic so it fits as it should. If your line even charges slightly, it’s crooked.. had this issue with vanstyle’s spoilers too. They shouldn’t be aloud to sell them, considering the amount of people who can’t or won’t feel comfortable shredding it up.
 
Back
Top