fault codes

  1. Pedro20001

    Engine code po235 help please!

    Hi all posted a couple of days ago , anyone got any advice on this code please? We are halfway through our holiday in germany. Will it damage the engine if I continue driving? Any advice is very much appreciated
  2. Y

    Tailgate Locking Problem.

    Hi All, I've seen a few posts on here re-tailgate locking issues but unfortunately none that have helped with my issue. The tailgate lock on my 2017 T6 (T32) seems to be "electrically" locked and I cannot open it with either the key fob, or either of the exterior or interior releases. I managed...
  3. B

    Flashing coil light P007B & P062B - resolved

    I posted in another thread that my van showed a flashing could light and going in to limp mode on Weds, we were travelling to France on Fri. My local VAG specialist were fantastic at accommodating and got two codes in VCDS that relate to the problem. P007B Intercooler Temperature Sensor -...
  4. M

    T6.1 - GPS Antenna, LTE Antenna 2, LTE Antenna 1 - All Open Ciruit

    I've got an issue with a T6.1 Transporter It has the following fault codes: B105413 - GPS Antenna Open Circuit B180B13 - LTE Antenna 2 Open Circuit B17FD13 - LTE Antenna 1 Open Circuit Now they don't clear, I know these are all located in the drivers mirror, however they are intact and are...
  5. Loz

    Faulty wheel speed sensor [Replaced]

    I received a number of warning lights including: Stability Control - ABS - TPMS - Front Assist - ACC Scan showed the following; Address 03: ABS Brakes (J104) Labels: 7E0-907-37x-MK100ESC.clb Part No SW: 7E0 907 379 Q HW: 7E0 907 379 N Component: ESC H06 0133...
  6. M

    Parking aid crashes when screen illuminates [Resolved]

    Hi I've got a 2014 transporter with parking aid issues. Basically when you select reverse image comes up on screen but then system crashes. Fault codes 13632256 & 13639168 (missing message) comes up. I'm assuming one relates to the front and other to the rear sensor's. Have already changed PCM...
  7. A

    P226D00 late Filter Deteriorated/Missing Substrate Bank 1 ☹️

    Hi, Has anyone had any experience with the fault code - P226D00 - Particulate Filter Deteriorated/Missing Substrate Bank 1 Have taken the filter off to be cleaned, no visible signs of damage on inspection with camera. Not wanting to spend 1500 on new filter ☹️ Any help advice would be...
  8. F

    VCDS Fault 17: Instruments -Databus - Missing Message inst

    Hi all I have just purchased VCDS (all new to me) and on scanning, I have 2 fault codes I cant shift. any advice or help as to where to start would be great fault 1 Address 09: Cent. Elect. Labels: 5Q0-937-08X-V2.clb Control Module Part Number: 2Q5 937 090 A HW: 2Q5...
  9. S

    VW Transporter T6 2017 Error on Dash

    2017 VW Transporter T6 Dash Errors Error: Stabilisation control (ESC) Tyre Pressure Loss Indicator currently not available Error: Start-Stop Error message from Carista. 00288 Steering Column Lock Actuator (N360) Any ideas how to fix this issue.
  10. S

    Air Intake Issue

    Hi all, the P2279 fault - should any reputable garage be able to diagnose this fault? Air intake leak, is it relatively straightforward to find the issue? How many possible points of failure could there be? Thanks in advance.
  11. S

    EGR fault codes

    Egr valve problems Euro 6 102 Had an oil sensor go on the van the other week which through up a start stop error on the mfd called roadside assist and thay sent the AA out to me, as the AA can read the codes numbers but cant tell what they are related too, iwas then told to book the van in...
  12. brabusuk

    Cluster faults

    Hello everyone Got a problem with my T6 2017 Oil level Oil pressure Brake fluid level Handbrake Faults on dash all this things (( Diagnostic said sensors, I’ve changed few but same I need help pls
  13. Carl1974

    Abs/traction control fault - which side?

    Anyone in the Liverpool or surrounding area that has a scan tool that will tell me what side my above fault is on please.
  14. W

    Reoccurring AdBlue Level Fault / EML / P204F00 / P20EE00

    Im a total novice and new to Transporters so bear with... Since buying my van (T28/2018/150bhp/panel van) it has had 6 occurrences in past 6 months of ad blue level jumping around (from down to 650 miles) and/or the EML light coming on. Same codes each time - P204F00 / P20EE00 Its under an...
  15. Adever121

    Glow plug light on off no limp mode

    New to the forum so hi to all and I understand this a t6 forum but just looking for some resolution as can't find anything online and it's left me scratching my head. I have 2013 t5.1 102 caab I've recently noticed a strange fault with the van, the van drives fine but when the engines pushed...
  16. C

    Compression test

    Hi All, I have a T6 panel 204 bop high line van which has covered 60,000 miles. Last week the engine started to make a noisy tapping noise, I plugged in my Carista and this gave me fault codes P1007 and 24840, which a friend who is a mechanic diagnosed as misfire on cylinder four, we decided to...
  17. Loz

    VAS 5051 error codes

    Fehler Code error messages 00000 0000 output end 00001 0001 brake control unit 00002 0002 transmission control 00003 0003 control unit 00004 0004 Control unit for gas operation-J659 00016 0010 Servomotor Fu.raum- / defroster, rear right-V195 00017 0011 Servomotor Fu.raum- /...
  18. ceejbee

    Carista code P226D

    Hi, just wondered if anyone can shed any light on this code that has appeared on Carista? Engine light came on so ran a quick check and this one came up. Many thanks, Cliff
  19. J

    Fault codes 00075 and 00079 with ABS and skid light.

    See the attached Carista codes they reset but come on again. Any wisdom would be very appreciated thanks Simon .
  20. Mick

    error code P20EE SCR Nox Catalyst

    Hi I am in Austria. I travelled out last week. On the way out I got a warning that my Ad Blue was at 600 miles. So I filled up the ad blue tank and it only took 8l: I thought it was 13 l tank. I checked the Carista and I got an error code P20EE SCR Nox Catalyst below threshold. So I reset it...
Back
Top