20"

I'm selling my 3000 mile worn Navis Twin-5 – 20″ bronze finish wheels. They are mint, packed away in the Navis boxes with wheel bolts/locking. These are out of stock on THQ. Looking for £750 collected from West Sussex, viewing welcome. Any questions let me know.

I believe I'm the first in the UK to fit the new Navis GP7, big thanks to @BognorMotors for hooking me up with a set on pre-order and installing as they arrived in the shop. :thumbsup:

My van is in having some work done at the moment, but as soon as it's back, the wheels are coming off and being sold. Navis Schmoov in 20" colour changed to my usual Chrome powder by Duchy. Tyres all mint (not load rated) but wheels are used, so have several stone chips and we did clip a kerb...

Having been a T6 owner for just a couple of months I was a little confused about what I wanted to do with my suspension and wheels. Having read a few posts on here and after a very informative initial conversation with Steve at @CRS Performance I decided on Koni & H&R springs, anti roll bars and...

So the first modification I would like to do to the t6.1 when it has been built, is full coilovers and wheels. The van is a T30 110ps Lwb ( funds just couldn’t afford the 150ps at this time ) I’m looking at getting fitted the Bilstein B14 komfort coilover and springs. Now the question is would...

BBS XA 20” alloy wheels x 5. 20” x 9.5j Bolt pattern 5 x 120 ET 42 Spigot rings 82.0 - 65.1mm 5 alloy wheels purchased from rim style for nearly £2500. Taken off my very low mileage t6 transporter. 4 of the wheels have covered 2000 miles only - the other was the spare and is mint with new...

Hi, To cut a long story short I got a puncture in my N/S front Leighton LV1 20" wheel. (T6.1 Transporter Feb 2021) I took it off to get in fixed and put on the spare, the spare is a standard 16" steel and with the van lowered on B14's it did sit a bit low on that corner. I put the punctured...

Evening all, For sale is my set of Leighton vans LV-2 20” alloys in gunmetal and polished colour. Fronts - 20” 8.5J ET45 with 275/40/20 tyres Rears - 20” 10J ET38 with 275/40/20 tyres Load rating on these alloys are 860kg per wheel and the tyres are rated 106Y. The alloys are as new pristine...

Hi all, newbie to the forum but have been lurking for a while and seems a very helpful place. Just bought a 2017 kombi and am a first time T6 owner so nothing to benchmark against. It vibrates and resonates quite a bit at low revs when pulling away and also seems to do the same at certain...

At long last, beefed up the look of my van, with “swamper” look. The original tyres will need replacing in a couple of thousand miles (c40000miles), and I have been fed up with my rattling van with its original suspension, wheels and tyres. Dan at Simply Surf Bus was brilliant, and took time...

4 x RIVIERA Safire Wheels and Tyres. The wheels are 20 inch. 20x10J, ET38, 850KG, 5x120. The tyres are Uniroyal RainSport 5 275/35/R20 102Y XL. Bolts and Locking Bolts included. 3 of the wheels have no damage, but varying degrees of milking on the diamond cut areas. The other wheel has the same...

Axe EX30 20” silver alloy wheels with polished face and used tyres Rears 20 x 10J ET 42 offset PCD 5 x 120mm Fronts 20 x 8.5J ET 40 offset PCD 5 x 120mm I’m told that these are load rated to 850kg Tyres will need replacing These wheels will benefit from a refurb as the lacquer is hazing and...

Sure I read somewhere a while ago that there is such a tyre as 245/40/20 with a 103 load rating. Anybody know what this may be ?

Up for sale are my stunning 20" Judd T311R staggered wheels finished in gloss gunmetal. They are virtually as new, purchased new by me last October from Bognor Motors. Ran for a few hundred miles then removed to fit winter wheels on. They are a staggered fitment being 10.5" (et45) wide rears...

Hoping to get some advice. I have recently had my T6.1 converted. Part of that conversion included the fitting of 20" alloys on General Grabber GT3 275/40/20. I'm looking for improved handling and less roll. What suspension can be fitted?

Hello, picked up a T32 a few weeks ago, come to change the brakes after having new tyres fitted and noticed that one of the 20" alloys fitted is different to the other 3 on the van. They're 8.5" all the way round and correctly load rated so that's the same, however one has an offset of 35 rather...

Hi all, Wanting ideas for nice 20s that actually look good for more than a year. So I’m staying away of anything diamond cut as the lacquer slowly fails and the worms come to bite. However, Navis or Super-metal wheels seem to kerb easily. So looking for suggestions that are less vulnerable and...

Looking to sell a set of 20" TTRS(?) style alloys. These came with my t28 T6 when I bought it brand new from Cambridge Campervans in 2019. Load rated to 900kg, they were on the van for no more than 2k miles before I swapped them for 18's. The alloys are structurally sound but they will need a...

I know nothing about T6 vans…. I Bought a T6 T32 LWB camper conversion…. It came lowered with 30mm vw springs and 275/40/20 load rated tyres…… Issue is I want to put it in Coilovers (B14’s or SoLows) and still want to run 20’s that will hopefully Slightly Tuck up in to the Arches. So what’s the...

I currently have 20" 275/35/20 wheels on my van which has a 5Speed box. I find the small increase in rolling diameter a concern when tying to pull away when towing my car trailer. The concern is putting too much torque / judder through the 5speed box. I would like to change to 18" swamper wheel...