Search results for query: centre bore

They sure look good. Will one of those new wheels fit in the spare wheel space?

...alloys, with tires for sale. Specification: Size: 20 Inch Width: 8.5J & 10J Offset ET: +35mm & +38mm Concave: 40mm & 60mm PCD: 5x120 Centre Bore: 72.6mm (72.6 - 65.1 spigots included) Max Load (per wheel): 875Kg All tires have plenty of tread left. They aren't perfect - hence the price...

Hi Daniel. They will fit the vast majority of T6s just fine. The 38mm offset on the 10” wide rear might only be a problem on really low vans, or a Caravelle or similar which has a thicker door card which can rub when you open the sliding door. For those vans Velare also do a 45mm offset on a...

The stud dimensions should be 5 X 120 with a centre bore of 65.1 for a T6 / T5 hub.

if you find where to tap it off, please let me know!:cool:

Landrover wheels have the same PCD, but have larger centre bores so will need spigot rings. This place has lots of info, List of car vendors and makes. Wheel fitment and tire size guide and knowledge base.

Here they are - Navis Twin-5 Wheel Specifications: Diameter : 20 Inch Bolt Pattern : 5×120 Fitment Only Width : 9J Offset : ET42 Centre Bore: 65.1 Colour : Gloss silver Style : Multispoke Load Rating 1050kg per wheel

What we have here is another example of someone who spends too much time sifting through selling sites. 9 full sets of centre caps in the 2 styles you see in the pictures (slots or holes) These are all off 2017 T6s and all in great condition. £20 a set including postage. See eBay for just...

Thanks for the idea. I am that bored at the moment that I'm reading these long threads all the way back.... I would imagine the LED is fed from a BCM output, so you could tap off the feed there, rather than ll the way from the driver's door. It probably needs an LED in the centre of the dash too...

The spigots on these wheels are a bit odd. The centre bore is 84mm with a large metal spigot ring that takes it down to 65mm. Apparently Wolfrace stopped making the 72mm version and started producing the massive rings to go with the 84mm version.

Tiguan wheels are 5x112 so won’t fit a Transporter, which is 5x120. The Transporter centre-bore is 65.1 mm - bigger than the Tiguan. Make sure whichever wheels you find are load-rated to match your axle weights (ie: T28 has an axle load of 1600kg, so the wheel has to be rated to carry 800kg or...

...was going to fit them and run them as my daily's but not got round to fitting any tyres since the refurb. Size is as follows: 8.5x20 PCD 5x120 Centre Bore 65.1 These retail at around £1099, I'm looking for £900 I'll thought I'd see if there is any interest on here, before going on social...

...if that makes a difference when compared to a T28. Is the stock suspension different depending on the van payload? Would be nice to hear from anyone who has bought these wheels for a T28 and what they would advise Thanks Size: 20x8.5J Offset (ET): 45 Centre Bore: 65.1mm (Direct Fit) PCD: 5x120

Thanks, but I don't have a welder or lathe. I've had a closer look tonight and couldn't see any remnant of drill bit left in so didn't grind it flat as I'd originally planned. I'll have one more go at drilling when the new bits arrive and after that I'll just have to take it somewhere.

B I’ve had similar experiences with titanium drill bits. It’s best to dull the cutting edge on a brand new cobalt drill when drilling soft material to avoid it ‘biting’, jamming and snapping. This can be done by using it on a relatively hard material for a short time. If there is a piece of...

...attempt....just ask @Tourershine as even with a mallet he couldn't get them to budge. I ended up hitting them with a larger hammer, filing off the powder coat on the centre bore and copper slipping to make life easier. Devonports will fit all T6s, ET56 is fine and have 65.1 centre bore fitment

quick question and will save me removing one of my devonport wheels if possible what size is the hub centre hole on the t6 ? new replacement wheels front hub is 72.54 and rear are 74.10 just need to know what the oem hub size is to order spigot rings. have had a look online and the search...

...chrome surround, on the right) fits my Sportline wheels whereas the domed cap doesn’t, and feels like the tabs will snap if forced: Domed: Flat: The centre bore on the wheels measures 53.7mm. They’re the gloss black T6 wheels with a silver rim: Is there a difference in Sportline cap...

...out a load rating in those images, but you need to have a minimum load rating of 805kgs for the wheels. Bolt PCD needs to be 5 x 120. Centre bore needs to be a minimum of 65.1mm, but can be more if you use spigot rings. You need 101 load rated tyres as a minimum, and on an 8.5" wide rim, your...

...without spacers i would think; I run (as do many) ET45 on 9J so these would be 3mm further in, and you're running a slightly narrower tyre too. You'll need spigot rings to adapt the T6 hub to the centre bore of the x5 wheel Seen plenty of T5's on tiger claws, but don't think I've seen any T6's