Search results for query: egr

I bought a new “off-road EGR” which also came with some additional horses and an inverted start stop (although that needs doing an other day because I forgot to ask!)

Hello we purchased a T6 EGR cooler delete kit for a 2016 204 bi tdi which consisted of the pipe and the blanks. Darkside kit. we have a video of the issue we're having since we fitted the kit, but I am unable to post here. we're getting a strange blowing sound coming from above the rear EGR...

My T5.1 is a 2010 and has no DPF. The EGR failed 3 times in it before I decided to get it mapped out. When my T6 started getting EGR and DPF problems I never hesitated. Got them both mapped out. The EGR was left in place but kept closed. The DPF needs the internals removed carefully so it...

Hoping you sorted it?

So from post 1; You had an EGR with insufficient gas flow but no issues with coolant loss. Garage strips the EGR cooler from the EGR valve, cleans and rebuilds. You haven’t mentioned if they tested the EGR unit before or after re-installing, this is important??? Engine consumes the coolant...

So my van has a Pendle remap. The EGR valve has died. The garage says they could just do a delete but it’d need mapping out but they can’t do it as my van is already remapped. Is there now way round this or do I have to get a new EGR?

So here we are. Managed to get OBDeleven to log. I wish it was easier to navigate but alas. Here’s the full run with egr, turbo actuator, boost spec and actual and pedal position.

Amazon stock and sell (which counts for something IMO) the VALEO 700435 EGR Valve which is an OEM manufacturer and you have 30 days to return as unused if the issue isn't the EGR. I personally wouldn't swap it as a preventative measure, only if broken, but others would so it's difficult to make...

Almost, except only one DPF, two catalytic converters, an ammonia trap, two EGRs, two EGR coolers, three NOx sensors, exhaust flap unit,...

I have always thought an engine warning light was an MOT fail.

Hi My VCDS does not show a login when I select the engine module ? I want to do EGR adaptation after fitting a replacement EGR VCDS is Ver 23. XX Rgds John

Did they give you the code scan results? An engine light will flag codes. Under/over boost? Egr flow codes? Etc etc.

So I removed the EGR delete (Tafmet) This was my last straw before asking for help on here. It made no difference, if anything it's potentially a little worse.

Also stock 2017 102hp 36000 miles on original EGR. Dealer flushed and new front pipe @ 3 years 16000 miles. P040100 and P20EE00 errors codes cleared by the AA on Bank Holiday Sunday, haven’t returned, so fingers crossed 🤞🏻

You could fit EGR pipe blanking plates on both pipes, you’d want to fit them at the exhaust manifold joint and the cylinder head joint to ensure the EGR does not get hot enough to generate steam from any leaked coolant. The engine will operate with a low EGR flow fault code because of the...

Quite different now - although an interesting moment at 20-40 seconds. Doing negative values side of EGR valve - this would direct gas into EGR cooler EGR valve perfectly following commanded. Doing positive values side of EGR valve - EGR cooler bypassed You didn't mention that...

as above its due every 40K miles. at 65k miles you might be looking at a new DMF and EGR cooler soon.

Hello, Im about to remove the EGR system on my T6 CXFA. But i was wondering instead of just install blocking plates, can't i just remove the whole EGR cooler/Valve and just plug the water hoses? Thanks :)

Hello, can anyone recommend a garage or mobil to blank and map out the EGR on my 204BiTDI T6, I'm in sunny Stoke-on-Trent, but willing to travel a short distance, many thanks

Would be grateful if you keep me updated on your outcome. I had got my EGR done the year before.