Bit of a issuise my wipers work , but arnt working on intermitant speed on the stork would anyone possibly possibly point me a daigram , could be a wire
Wash/Wipe System Circuit Diagrams Includes front and rear screens, LED headlights washers and heated washer jets VIP Membership is required to download this document
Wash/Wipe System Circuit Diagrams Includes front and rear screens, LED headlights washers and heated washer jets VIP Membership is required to download this document
On the daigram. Is it e22 or e38 that controls intermittent wiper speed as it’s only fuction that dosent do anything when wiper is in intermittent mode
On the daigram. Is it e22 or e38 that controls intermittent wiper speed as it’s only fuction that dosent do anything when wiper is in intermittent mode
E22 is the switch itself and E38 is a resistor network through which the "wiping frequency" is read by BCM - via brown/yellow wire from T41/17 to BCM T73b/62.
E22 is the switch itself and E38 is a resistor network through which the "wiping frequency" is read by BCM - via brown/yellow wire from T41/17 to BCM T73b/62.
One more thing: if the BCM is coded for automatic wipers the intermittent speed setting does nothing because the BCM is supposed to control the speed and if the wipers are on in the first place
One more thing: if the BCM is coded for automatic wipers the intermittent speed setting does nothing because the BCM is supposed to control the speed and if the wipers are on in the first place
I have to apologise not realised because I have t5.1 wiper stock fitted in a early t5 van mine still has the old bcm instailed ( as the t5.1 bcm I have only powers the heater controlls
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.