T6.1 trailer module coding help

[kirkm5238]

Can any one help with the coding for a t6.1 I’m after a screen shot of the trailer module coding to compere to my cousins van we r getting problems with the genuine tps kit that’s been installed if that would give us an idea if it’s been coded correctly thanks

 

[mmi]

-------------------------------------------------------------------------------
Address 69: Trailer (J345) Labels:* None
Part No SW: 5H0 907 383 HW: 5H0 907 383
Component: Anhaenger H09 0040
Coding: 0100000202001300
ASAM Dataset: EV_TrailFunctGener3Hella 001009

Aux Heater coding - 2020 Caravelle

Please forgive me, I have read the two main threads on aux heaters (Link1, Link2). I have the same questions as most. How to get my aux coolant heater to heat the engine \ cabin without the engine running. My vehicle, Caravelle Exec build date July 2020, has factory fitted Aux heater...

www.t6forum.com

 

[kirkm5238]

-------------------------------------------------------------------------------
Address 69: Trailer (J345) Labels:* None
Part No SW: 5H0 907 383 HW: 5H0 907 383
Component: Anhaenger H09 0040
Coding: 0100000202001300
ASAM Dataset: EV_TrailFunctGener3Hella 001009

Aux Heater coding - 2020 Caravelle

Please forgive me, I have read the two main threads on aux heaters (Link1, Link2). I have the same questions as most. How to get my aux coolant heater to heat the engine \ cabin without the engine running. My vehicle, Caravelle Exec build date July 2020, has factory fitted Aux heater...

www.t6forum.com

Thanks mate our coding is slightly different ours is bottom one
0100000202001300
0200000202001200
I don’t know what difference is but seen two like the one you posted now same coding don’t if that would give us the fault when caravan plugs in only one side of side lights work when breaks r pressed indicators come on but work on there own as they should pcd cuts out so dose fog if plug van in not running all the displays in caravan light up and display van voltage and leisure battery voltage but when started kills caravan control panel tried caravan on different van it all works caravan has that stability program or something on it aswell

 

[Robert]

0100000202001300 is the correct coding as suggested by @mmi
Currently, you are using coding 0200000202001200 which is for a different platform and for North America Region lighting setup.

 

[kirkm5238]

0100000202001300 is the correct coding as suggested by @mmi
Currently, you are using coding 0200000202001200 which is for a different platform and for North America Region lighting setup.

View attachment 175831

Thanks robbert do you think that could cause the issues we r having thanks kirk

 

[Robert]

Yes, in deed.

 

[kirkm5238]

Yes, in deed.

Thanks Robert will get it changed will report bk how we go thanks for your time

 

[kirkm5238]

Thanks Robert will get it changed will report bk how we go thanks for your time

Thanks you everyone one coding was incorrectly done it’s was done by a remap specialist we thought it was correct so we changed it to the above coding now the rear lights on caravan work as they should it’s saved him a bill from vw trying to sort it out the forum Is full of good people willing to help others thanks