I’ve recently purchased a used T6.1 150 with around 80,000 miles on the clock. On the approx 120 miles drive home from the dealership, the “Reduce Oil Level” warning appeared on the dashboard. I hadn’t heard of this being a common issue until I began researching online, but from what I’ve read it can sometimes be caused by fuel dilution—often linked to interrupted DPF regeneration cycles—and can be managed by ensuring the regeneration process is allowed to complete.
To rule out a simple overfill, I’ve sent an oil sample for analysis to confirm whether the cause is fuel dilution or just excess oil, with the warning triggered after a delay.
My bigger concern is that, after running a scan with VCDS, I discovered the van has apparently been driven for over 2,000 km with this warning active:
IDE06608 – Total distance with active oil overfill warnings: 2,074.3 km
This suggests it’s a recurring issue rather than a one-off overfill, and 2,000 km seems a long distance to operate with the warning present. I’ve asked VW to confirm whether this history could affect eligibility for any extended warranty I might purchase.
I’d be interested to know whether other owners see a non-zero value for this parameter in VCDS scans, and—most importantly—if it has impacted warranty claims in practice.
Any opinions on whether I should be looking to return the van based on this information?
To rule out a simple overfill, I’ve sent an oil sample for analysis to confirm whether the cause is fuel dilution or just excess oil, with the warning triggered after a delay.
My bigger concern is that, after running a scan with VCDS, I discovered the van has apparently been driven for over 2,000 km with this warning active:
IDE06608 – Total distance with active oil overfill warnings: 2,074.3 km
This suggests it’s a recurring issue rather than a one-off overfill, and 2,000 km seems a long distance to operate with the warning present. I’ve asked VW to confirm whether this history could affect eligibility for any extended warranty I might purchase.
I’d be interested to know whether other owners see a non-zero value for this parameter in VCDS scans, and—most importantly—if it has impacted warranty claims in practice.
Any opinions on whether I should be looking to return the van based on this information?
