FactionRaptor
Member
Yes I've got the rattle and plan to do the same, I almost thought about putting the Dodo sound deadening sheets in the base for the rattling
Stide Bed system
- Thread starter M4rc
- Start date
There is a screw, like a bump stop on the same side as the lever. If you tighten that up, it might help. Did on mine.
That's a good idea. I still have dodo insulation. I'll cut a piece out
If you fold the seat base open, you'll see a screw in each corner of the metal frame. Check those are tightened up, they can make a tinny rattle.
Worth it for the extra boot space.
That’s interesting, I have a number of threaded holes on my seat but none have bolts in them. That being one of them. Should they all have adjustment bolts?
I'd expect so, although I'm not certain they all actually achieve anything and could be there for other purposes, i.e. if it is on a sliding base.
The one in the pic above does need to be there I'd say.
The one in the pic above does need to be there I'd say.
Yes I'm having similar issues - after less than a year the locking mechanism has become spongy, and I'm having rattle and squeak issues on the move. Interestingly they stop if I put the back in to the bed position, so I wonder if the weight of the back when upright on the less supported rear of the frame causes it to wobble?? I may try a wedge on the rear of the frame to support it and see if that stops the noises when the back is upright, and I need to consider whether the locking mechanism feels positive enough to do its job in the event of a crash.
If I take a video of where squeaks are coming from and send it privately then maybe we can share a resolution. It's only heard when on uneven surfaces.
Have you adjusted the screw I pointed out?
No lol Refresh my memory. Have you? Did it work?
Post 23
