OEM interior

[Andy.H]

Does anyone know if the T6.1's came out of the factory with rear upper panels please?
I'd like to carpet them if i can get hold of any.

 

[JumpShip]

I thought it was either just the lower or a full height panel

 

[Andy.H]

That's what i suspect. I have enough thin ply to fashion one, just not sure how straight the lines will be

 

[Skyliner33]

That's what i suspect. I have enough thin ply to fashion one, just not sure how straight the lines will be

I have some ply panels for those places. Bit far away though

 

[manfrotto]

I am in the process of cutting some plywood panels out for my van. I made a cardboard template first, as there are not really any "straight lines"
My van is the same as yours re - just bottom panels, and holes for the scrivets in the top half.

 

[Andy.H]

I think that's what I'll do, I have some thin ply and will use self tapping screws with covers to attach them to the wall.

 

[manfrotto]

I think that's what I'll do, I have some thin ply and will use self tapping screws with covers to attach them to the wall.

I was tossing up between rivnuts and standard VW Scrivets (as I will not be putting and additional coverings on)

I have ordered the plastic Scivets, which I have tested (using one from another panel) with the 4mm ply and work fine.

 

[Andy.H]

Hmmm, I have a load of longer scrivets from Combe Vally Campers, I'd only need to drill the holes. Good shout

 

[manfrotto]

Hmmm, I have a load of longer scrivets from Combe Vally Campers, I'd only need to drill the holes. Good shout

My van has all the holes already - You probably will as well, but covered by the lining, so just a maker of locating them.
My van is a LWB with no windows, so probably differeint to yours, but IIRC I have 6 holes along the top, 5 along the bottom and 3 down the back. None on the front . I can take a photo if that is of help?

 

[Andy.H]

I'm fairly sure mine doesn't have the holes, been taking photos as I've been going along.
Thanks mate, a photo of yours could be helpful.

 

[manfrotto]

These are the holes I am refering to: