New battery and alternator, van won't start

After I limped it home I tried to see if it would restart and it was cranking and not firing then... So Im no further along really. The new alternator I put on was just my old one that was reconditioned by a local firm. I'm alright with spanners but a spanner with tech. I'll get someone out👍
 
It's got a leisure battery fitted, seen something about a hard reset and disconnecting it.... Might give that a go...
 
Just to add 2019 t6.1
Which one - 2019 or T6.1, can't have both.
Which engine exactly - engine code please - something like CXGA, CXGB, CXHA,....

P056200 system voltage engine fault
Is this a current fault or just a thing of the past. Does it clear? Does it come back?

Can't comment in obd11 for reading the engine computer data?

@mmi any joy with obd11?
Yes, it can be of some help. All ECU data is available - when you know whar to look for. However VCDS would save A LOT of time, and probably money, too.

If the fault P0562 has been cleared/resolved:
OBDeleven > Contorl Units > Engine > Live data​
1) Check camshaft timing offset > Camshaft adaptation intake bank 1, phase position
2) Verify fuel pressure build up when cranking > Fuel pressure
3) Verify the ECU fires the injectors when cranking > Main injection, duration of activation

 
Comes back
Immediately after clearing (without cranking)?
Anyways, the fault need to be resolved as it seems the ECU isn't fully powered.

Sorry my bad 69 plate t6.1
Sorry but the plate designation is just a UK registration thing. Being a T6.1 it must be model year 2020 then...
Still need to know the exact engine code - as they all are not wired the same. Something like CXGA, CXGB, CXHA,....
 
Back
Top