Hex+Can on 2016 mod Transporter 2016 Working?

[vidarkippernessorvik@gmai]

Will this cable, Hex+Can work on Transporter 2016. T6 Having problems with Output Test and Basic settings. I have no communication.
Reads and deletes error codes.

 

[Dellmassive]

is it a genuine cable?

and have you got the latest version od software?

VCDS / VagCom - How I Done It -

VCDS / VAGCOM - How I Done It - *********************************************** The current software version is : VCDS FULL Release V19.6 VCDS-Lite Release V1.2 VCDS-Beta V19.6.1 Click HERE for More Details Ross-Tech: VCDS: Downloads: Current Release and Manual...

www.t6forum.com

.

 

[vidarkippernessorvik@gmai]

is it a genuine cable?

and have you got the latest version od software?

VCDS / VagCom - How I Done It -

VCDS / VAGCOM - How I Done It - *********************************************** The current software version is : VCDS FULL Release V19.6 VCDS-Lite Release V1.2 VCDS-Beta V19.6.1 Click HERE for More Details Ross-Tech: VCDS: Downloads: Current Release and Manual...

www.t6forum.com

.

Yes genuine cable and New software

 

[vidarkippernessorvik@gmai]

is it a genuine cable?

and have you got the latest version od software?

VCDS / VagCom - How I Done It -

VCDS / VAGCOM - How I Done It - *********************************************** The current software version is : VCDS FULL Release V19.6 VCDS-Lite Release V1.2 VCDS-Beta V19.6.1 Click HERE for More Details Ross-Tech: VCDS: Downloads: Current Release and Manual...

www.t6forum.com

.

Upon the first launch of the program, I was able to bleed the fuel system one time.
On 2. try now most of the tests Output Test functions not working, all reporting 'Refused by Control Module' 7F 2F 7F .

 

[Dellmassive]

should be fine then. . .

so you are trying to run the fuel lift pumps?


have you tried locking the van for 30mins so it sleeps? - then try again.


also try opening/closing the van bonet, as this sometimes can stop functions from running,

 

[vidarkippernessorvik@gmai]

Have removed the battery for 24 hours. shorted + - terminal. bonet open and bonet closed. deleted software and try new. Tried with another PC.

but will try to lock the car.

Yes trying to bleed the system.

 

[vidarkippernessorvik@gmai]

should be fine then. . .

so you are trying to run the fuel lift pumps?


have you tried locking the van for 30mins so it sleeps? - then try again.


also try opening/closing the van bonet, as this sometimes can stop functions from running,

 

[Dellmassive]

@mmi

Have you got any input with this vcds related question.?

 

[vidarkippernessorvik@gmai]

@mmi

Have you got any input with this vcds related question.?

No solution found yet. locked the car now, will let it sit for a while and then try

 

[mmi]

@mmi

Have you got any input with this vcds related question.?

Fault code 7F 2F 7F Transporter T6 2016

Hi, I've just started using VCDS trying to diagnose a no-start condition on my 2016 Transporter T6. Upon the first launch of the program, I was able to bleed the fuel system one time. On 2. try now most of the tests Output Test functions not working, all reporting 'Refused by Control Module'...

www.t6forum.com

 

[vidarkippernessorvik@gmai]

Fault code 7F 2F 7F Transporter T6 2016

Hi, I've just started using VCDS trying to diagnose a no-start condition on my 2016 Transporter T6. Upon the first launch of the program, I was able to bleed the fuel system one time. On 2. try now most of the tests Output Test functions not working, all reporting 'Refused by Control Module'...

www.t6forum.com

No.

 

[Robert]

Yes genuine cable and New software

You could consider trade in.

Trade Dongle | Ross-Tech

 

[jayc001]

I have this exact issue with my VCDS, everything else works but no lift pump for priming. Same tablet and interface work fine on T5.1. In the end I just used my OBD11 to prime after a filter change.