For Sale Full Feelart Onesub setup

Phil Blackburn

@T6PBX
VIP Member
T6 Guru
Full Feelart Onesub set up including plug and play loom for OEM head unit.

Front Speakers

25MM Silk ball top diaphragm treble/ N40 advanced neodymium steel magnetic circuit.

Steel-and-iron mid-bass stand/ special pulp board mid-bass sound basin/ 10OZ magnet.

Two-layer aluminum sound coil/ Symmetrical passive crossover.

Type 2 way split speaker

Size 165MM(6.5")

The Number Of Loops 2 way

Sensitivity 91dB

Impedance 4Ohms

Maximum Power 120W

Rated Power 60W

Frequency Response 60Hz-20000Hz

One Sub (subwoofer)

4.1 Channel DSP power amplifier and subwoofer audio system

Directly connected to the original car, audio upgrade without any loss; digital blue-tooth lossless transmission, capable of getting songs from mobile phones.

Highly-efficient bass, compensating the low frequency flaw of the original car; efficient power amplifier, making full use of the horns in the car.

DSP custom-made EQ, only for you; DSP customized delay, presenting you the excellent sound performance.

Performance Parameter

Main Chip Resolution 48 bits

Audio Sample Rate 96KHz

SNR(signal to noise ratio) ≥110dB

THD (total harmonic distortion) ≤0.02%

Frequency Response 10Hz-22KHz

Rated Power 30W×4(full frequency)+60W×1(low frequency)

Maximum Power 60W×4(full frequency)+120W×1(low frequency)

Mains Input DC9V-15V

Size(L×W×H) 345mm×245mm×70mm

Manchester based if you want to collect or can post no issue.

£450 ono

IMG_2264.webpIMG_2266.webpIMG_2265.webp
 
Back
Top