Advice removing double sided 3m tape without damaging paintwork please

John Drake

New Member
We have an autovox solar powered reverse camera attached by the supplied 3m tape. Safe as houses and strong as a rock. We’re changing the camera. How do I remove the tape without damaging our paintwork ?
Thankfull for any advice you all can offer
 
Wet it liberally with IPA and “scrape” it off with a bit of plastic (credit card type thingy)
 
Bizarre but I’ve found soaking with a good spray of furniture polish really helps. It breaks down the adhesive. (Also WD40 works ok)
I’d dab it with tar spot remover (the kind you use for car detailing) and pick away at it then spray with the polish or WD40
 
  • Like
Reactions: DXX
will any IPA work or do you need a specific brand? Buxton Axe Edge is my "goto" but Vocation Life & Death could be an option.
Cracked me up!

I really should have said isopropyl alcohol for the avoidance of doubt!!!
 
We have an autovox solar powered reverse camera attached by the supplied 3m tape. Safe as houses and strong as a rock. We’re changing the camera. How do I remove the tape without damaging our paintwork ?
Thankfull for any advice you all can offer

Which camera are you changing too as our autovox camera has stopped working.
 
Back
Top