Adding amp & sub

[Jeff Goodall]

Hi all,
I have fitted gladen front speakers & very pleased.
I would like to add amp & rear sub near wheel arch.
I will fit amp in rear also as under seats are full
Can you use existing factory speaker wires & where do you get a custom wiring loom from .
Also thinking audison amp would appreciate any advice.

 

[wortho08]

Hi jeff did you get this sorted? I'm also thinking of doing the same

 

[The Flying Scotsman]

Are you wanting to amplify the front speakers Gladens in Jeff’s case?
Or just the sub?
You can get a small amp that fits in the dash that will amplify your front speakers using existing wires.
To get a sub on the go in the rear you will need to take a decent gauge fused power wire from the positive side of the vehicle battery to the amp, a set of RCA wires (phono leads) from the head unit to the amp and a single wire (remote lead) from the head unit to the amp.
The amp will also need a decent gauge earth wire attached to the chassis

 

[Jeff Goodall]

Hi jeff did you get this sorted? I'm also thinking of doing the same

Not yet , I was hoping for a little more help on here your the 1st to reply

 

[Absolut5]

A great amp that we use, a Audison sr6.600 with optional bass control, 6 channel so can run F/R and sub or we use it in the follow configuration tweeters on 2 channels, door speakers on a set of channels and bridge the last 2 for sub, has band pass so can run it correctly for this set up. Auto turn on and direct speaker in.. powerful and great sounding

 

[Garyde]

I've got the setup from @Absolut5 running my gladen's and underseat sub, its excellent and also highly recommend the service from Absolut5.... top company to deal with!

 

[Absolut5]

I've got the setup from @Absolut5 running my gladen's and underseat sub, its excellent and also highly recommend the service from Absolut5.... top company to deal with!

Thank you