3/4 trims

M

Matt-T68

Senior Member
VIP Member
T6 Guru
So the one thing that is bugging me is the thin blue line. Not the boys in blue but this...
1000013708.jpg
Best ideas please. Do I just get some black paint behind there or are there easy to fit options?
 
You can buy a strip off the internet for £50 or there abouts for this gap. I had some diamond advice from @Bigsidavies (I think) prior to gluing my windows on, to run a line of the black primer down where the joins are to hide paintwork underneath. So yeah a bit of dark paint between will hide it. May be easier to run a bead of black sealant down there with a fine nozzle in your caulk gun. I think if you aren't a Yorkshireman you should buy a trim strip for it and it'll look proper OEM
 
I picked 2 up on the way home and mullered them trying to fit it. Bloody awkward trying to get the sticky edge between the body and glass. Looked horrible. So back to square 1
 
I can't find much in the form of I trim. Something off the below that you can just slide it up between the two windows and maybe a dab of glue top and bottom would keep it there

Items for sale by ytwwindscreens | eBay

Shop eBay for great deals from ytwwindscreens!
www.ebay.co.uk
 
Tried one Kev. A pig to get between the body and glass and fit squarely. Mullered 2 trying today. Unless there's a secret technique to it.
 
Which is what i should have thought about really. Just seen these but £44!! And I need 2x for the twin sliders 😭
 
Personally I removed them off my OEM twin slider as the other option looked better. With the door open, is it that difficult to fit the camper glass version (I was thinking you were a single slider which I would imagine is even more difficult
 
You've got twin sliders? I assumed it was the none sliding door side you were struggling with. I think you just open the door slightly to apply don't you?
 
I think i may have fitted them wrong. Do they go on the back of the front edge of the rear 3/4? That's where I assumed. Maybe not then 🤔
 
Badjamin said:
You've got twin sliders? I assumed it was the none sliding door side you were struggling with. I think you just open the door slightly to apply don't you?
Click to expand...
Yes mate twin sliders. But I'm a bit confused where they actually fit. I tried the front edge of the rear glass but the rear of between body and glass.
 
Matt-T68 said:
I think i may have fitted them wrong. Do they go on the back of the front edge of the rear 3/4? That's where I assumed. Maybe not then 🤔
Click to expand...
Yes that’s where they go. If it’s the other way around they will catch every time the door is opened.
 
With twin sliders I'd just paint in the recesses. May be even just use a black marker to start with, to see if it's even worth opening the paint for.
 
You must log in or register to reply here.

Similar threads

J
2022 T32 SWB 204 Highline DSG 4Motion Day Van Price
Replies
7
Views
330
JJW
J
A
Rear-view Mirror sensors
Replies
0
Views
224
andrew7
A
M
Disconnecting the Fuel Tank
Replies
5
Views
304
mikeyb7
M
F
Fitting the B-Pillar Heater Ducting to Trim Panel
Replies
8
Views
640
r1cko
R
C
Cost of cross climate
2 3
Replies
50
Views
2K
Lubrown
L
Back
Top