Search results for query: Solar how I did it

- see here - SOLAR: Solar Pwm & Mppt Controllers - How I Done It - Mobile Solar Panels ? . . . - How I Did It - What Solar Panel & Controller? - How We Done It - Solar Panel Cutting Hole In Roof !!! - How We Done It - 300w Plus Solar Club -- How I Done It -- Solar Sheds & Other Non-t6 Solar...

Lots to look at, Thanks

yes you can do that . . . . . just make up a MC4 link cable set and connect to the DCC50 - then run an extension MC4-MC4 out to the panels - Then connect to the panels MC4 ................. or you can just use the included Renogy controller alongside the DCC50 - just connect a fused quick...

There are a few members on here with this type of setup, Using a vicron charger in power supply mode, A10, 15, 20, 30 amp charger depending on your loads. Please set up does work well but is very inefficient with all the conversion. Ia 12V to charge up the 54 volt battery pack to change...

upgrade the battery to a lithium, then add more solar. +++++++++++++++++++++ this weekend, running 1500w coffee machine, 900w kettle, twin fridges, uSB, lights etc etc etc . 400w tempory on roof. . . . 230Ah Roamer storage battery, - [Guide] Mobile Solar Panels ? . . . - How...

1. Yes, sort of. If it's longer than a few days I would disconnect fully via a switch or pull the fuse.... Hard wire to the leisure battery is best. 2. Yes. Hard wire is best... Make sure you fit a fuse to the battery connection. - but maybe fit a quick disconect inline to the conreoller can be...

yes. . . but keep the current below 6A/8A or the plug & socket will get HOT. a 50-100W dash panel is ideal. . . see here when i done it. https://www.t6forum.com/threads/guide-mobile-solar-panels-how-i-did-it.13225/post-195897

these Bluefusion kits come with a fuse...

the final option is the full leisure install. leisure battery, : Lithium LifePo4 12v Batteries - Time For An Upgrade? dc-dc charger, : [Guide] DC-DC Charger (for leisure battery) -- How I Done It -- add in EHU charging, : Battery Chargers - How I Did It - solar etc etc . . . : [Guide]...

Did you use the split mc4 connectors? Got a pic of that connection?

I am so at a loss I have no idea what to look up online to try and diagnose the issue. So I was just doing what I thought was some routine tidying up, just reconnecting a light which came unplugged at the plastic screw terminals and adding a couple of blade terminals to connections which I had...

.. https://www.t6forum.com/threads/guide-mobile-solar-panels-how-i-did-it.13225/post-195897 . https://www.t6forum.com/threads/battery-chargers-how-i-did-it.10812/ ... https://www.t6forum.com/threads/which-jump-starter.9140/ ...

Yes 70Ah AGM leisure. I came to same conclusion and already asked Solar Shack for the 100Ah LiFePo4 battery. As you say, not just the Ah rating that matters but depth of discharge. Got several trips booked already and Dubbed Out Festival so getting the set up how we want it is worth it to us...

So a year on and the MTTP is still in the box.... So I just need to get my Amazon basket filled with the goodies. But just a couple of questions... Do I need to match the cable gauge for the pre made solar cables to the tails I need to create (12AWG) https://amzn.eu/d/8ydYKli...

I use the Renogy dc50s for dc-dc charging, with a lithium. (, With the app) And even though it does solar, that splits the power 50/50 when you add a solar connection. I use a seperate Victron mppt. As they are the best when used with the app. I had the Orion, but sold it on, preferring to...

running any panel direct to a battery is not realy a good idea. esspecialy is its not fused or has a internal blocking diode. as you say you can run it through a solar controller to get around that problem. . . either PWM or the better MPPT controllers. . also on that note 20W is very low...

MC4 pv connectors come on the panels. Then you follow the male, female, male, female all the way to the controller. You need to use a multimeter to confirm the polarity .... Connecting up wrong could damage kit. .. https://www.t6forum.com/threads/guide-solar-cables-how-i-did-it.28470/ ...

Hi, how did this work out for you? I'm looking to do something very similar, any info/tips/pics would be appreciated. Cheers Gary

Again big thanks to Lee @Dellmassive I've taken a steady approach to sorting this, and got it all up and running, so pleased with the voltage charger suggested, as you can see how its all functioning through the APP. Here's some photos: In the cab, I've mounted the VC to a plate as I'm not...

[Guide] Solar Cables? . . . - How I Did It - its time for another guide . . . This time on solar cables. we use these cables for permanent install and for mobile installs. lets start with the Solar PV MC4-MC4 cable. Solar PV cable is not actually standard cable . . . its more specialised...