Search results for query: bulb change

Is it worth changing the H1 bulbs to HID aswell or just the H7?

Ye I've checked the rears and they are incandescent bulbs

Hi I get a bulb out warning even though I changed both front headlight bulb recently. But if I turn the Caravelle engine off with the light switch on and start it again the bulb out warning is off. Would appreciate any advice. Thanks

The T6 uses a conventional halogen bulb for the indicator in the LED headlights bizarrely. Has this been checked to see if someone has changed it for a LED, hence the fault?

Hello guys, hope you are all well. I have the awful H4 candle powered bulbs and would be happy to have them upgraded this year but not sure how. I`ve checked the forum and read people suggesting to just change the headlights instead of messing about with bulbs. Any recommendations or links for...

I changed the side repeater bulbs from halogen to led. As expected, got the fast flash and bulb out error. I went through all the LED settings on the 'lamp load' settings until I got one activated that seemed to keep the bcm happy. So far so good, no fast flash, no errors bulb warnings and...

They are the transporter HQ ones so should be plug and play. Not getting any errors when they are installed. Even with both lamp units unplugged it was still doing it? Guessing no harm in trying to code them to LED

Ah ha someone with some vital info!!! You are a legend No not checked that bulb, only because i dont know how to get in the back of the headlights, there's hardly any room to get my hand in Does the bumper need to come off to get to these bulbs?

Don't bother. I went through the process of trying pretty much every available 'bulb' in mine about 5 years ago. Halogen bulbs work well in reflector lights, but the small reflectors and light shifting lenses in any projector lights robs too much performance from them. Even the 'best' halogen...

Do you mean a change to LED indicator bulbs or any LED bulb on the van? The near side side repeater has some condensation in it could that be the issue? That side repeater works perfectly, all the lights externally do

The Osram LEDs will give you a bulb failure warning as they are not Canbus compatible. The Nightbreakers also have a shorter lifespan than lower power bulbs so you may find you need to change them more often. Depends how important ultimate brightness is vs longevity. I went with Twenty20 LEDs...

Bought yesterday but arrived and fitted this morning - a set of LED Interior bulbs (front and rear) from THQ. One of the map lights in the front died on Thursday so I used the opportunity to change the whole lot. All cool white, no flickering and much better that the old yellow ones. Pic for...

Hi this photo is the back of the full beam (H1 I am told) for an after market head light. I was able to remove the cable from the back but unlike the headlight bulb there is nothing to turn. Is there a clip or quick way to release the bulb? I can’t see this when I’m trying to feel around, I put...

Hi, I thought to open another thread because the information around is mixed at best. I have even "consulted" Gemini AI and I got it wrong twice in a row. I wanted to know which bulbs I have on my Entry Level 2023 Transpoter/ Kombi in the REAR lights (Tailgate model), since I got some error in...

Yes the bumper has to be removed to get at the indicators. You’d be able to tell from outside by looking at them flash whether they’d been changed. I’d check the rears too, make sure they have incandescent bulbs in.

Im driving in Germany and I know here its legal and in the uk not . I've just changed my bulbs over to the Philips Led( No canbus errors) and a vast improvement ! I based my info mainly on this article that's in German but if you use a page translator its interesting ! Time the uk catches up ...

Changed DLR/ DRL bulb drivers side, stoooopid bloomin design

Hi all just a quick question, I have recently upgraded my 19 plate T6 headlights to after market led projector lights with sequential indicators, the DRL bar acts as the sidelight but it doesn’t dim when the switch is turned to sidelight position ? Only when on headlight position, I have...

Cheers Dan assume that can be done with my OBD11

Hi, for some reason the pics have come out blurry. Not sure why. Ok 09 Leuchte 16 17 Lamp load settings value new Led tagfahrlichtmodul versorgung. Was the only value that kept everything happy. Tried all the 'LED' title ones to no avail. I kept the dimming for AB at 100. Seems very bright...